Jump to content

dhh3

Journey Member
 View Profile  See their activity

  • Posts

    3,303

  • Joined

  • Last visited

  • Days Won

    76

 Content Type 

Everything posted by dhh3

  1. dhh3
    bigtsr, does your Jeep have Start/Stop at traffic lights? This is the first time I have ever heard of Hill Assist on an automatic transmission. Usually, the torque converter stall speed take care of this.
  2. dhh3
    Has to be a bad converter in the harness. Can you unplug the harness, and plug the tail lights back to the way they were? Do they work properly?
  3. dhh3
    Reflashing the transmission brings it back to factory specs. It will then "learn" your driving habits and shift accordingly. The previous owner probably drove it differently than you. I purchased mine new, and have never had an issue. Usually, I can not feel it shift.
  4. dhh3
    Hill Start Assist, at least in a Subaru, puts the brakes on when you are starting on a hill with a manual transmission. As soon as you give it gas, and release the clutch, the brakes release. Are you saying that you have a manual transmission? This is not offered in the States, so it would not be a function of Uconnect.
  5. dhh3
    You say you don't want a V6. IMHO, the Pentastar is almost too much engine for my FWD DJ. Torque steer is horrendous. Why could they not come up with equal length half-shafts? I can burn rubber in any instance, even with my oversized tires. I have to keep my hands tightly on the wheel while hard downshifting, but she scoots when necessary.
  6. dhh3
    Might be the lock up clutch for the torque converter if it is only happening between 45 to 55 mph.
  7. dhh3
    What happens when you plug your trailer in?
  8. dhh3
    I can see why. When the mood stirs me, I'll probably just get a set of Silverstars.
  9. dhh3
    Welcome.
  10. dhh3
    The hatch itself is plastic. The sensor may be built into the light.
  11. dhh3
    For what it is worth, the IP installed halogen projectors just like I put in my Nitro. They look cool, but as stated, light output is horrid!
  12. dhh3
    Welcome. My choice would be to cut a square hole in the screen and slide an RBZ MyGig into the hole!
  13. dhh3
    I used the Mopar harness. This harness has a series of Relays wired into it. Does the Curt harness have any relays?
  14. dhh3
    Chrysler has made it difficult to upgrage the Uconnect HU, but I managed to do it! Ha
  15. dhh3
    Nice color!
  16. dhh3
    There is a YouTube video where peanut butter is used to clear foggy headlight lenses. Maybe it would work on these. Note: not Chunky.
  17. dhh3
    man van
  18. dhh3
    The DJ is only rated to pull 2,500 pounds, and this amount decreases as you add passengers and luggage. Therefore, the DJ is not set up for a trailer brake controller. Can you change the trailer to surge brakes?
  19. dhh3
    Search on eBay: 2013 dodge journey engine splash shield
  20. dhh3
    Everyone has a right to his/her own opinion. I only buy from my Dealer. No issues.
  21. dhh3
    Yes. Because one would be assured of getting genuine parts, and the installer could stand behind his work.
  22. dhh3
    Beware of auto store parts. Autozone sells cheap Chinese junk knockoffs.
  23. dhh3
    SRT4 maybe?
  24. dhh3
    What indication(s) did you get? CEL?
  25. dhh3
    2 years and 13,000 miles with mine with no issues, except two small recalls. For the life of me, I can't figure out why the press is so down and negative on this vehicle.
×
×
  • Create New...