OhareFred

The only storage in the seat is on the passenger side.  Didn’t you try it before you bought it?  It’s not just the base that would need to be changed, the entire seat would have to be swapped out for one without the under seat storage.  Never heard this complaint before.

It could be your Iphone and UConnect are not compatible lots of issues with updates etc changing the way they function

This is a situation with the 3.6 motor that is very common to have the P0306 code, the problem is that you've already done what most can do to try and fix it. There are a number of other things internally that can cause this in the cyl. head/valve train. AND even the coil driver circuit in the ECM could be a possibility.
Your EVAP monitor is most likely from a separate issue OR something with O2 sensor reading way off from normal expected signals from the misfire condition.
 

Maybe it's actually just stalling a lot and a shady used car salesman convinced him that it was a feature.

Just because it’s not supported doesn’t mean you couldn’t use an explorer version offline to run the disk.
Maybe print out some useful critical torque charts etc for safe keeping.
I guess Macrocrap is trying to force people to windows 1910.

Maybe the op IS driving a Durango.  We may never know, 1 post wonder?

Wrong car maybe?

Must be a new and improved 13....mine doesn't have it ride on

Hi, I have a 2013 Dodge Journey and absolutely hate the feature that stops the engine at red lights. I do not see a button to turn this off, only the START/STOP button to start the engine. Where is the button to turn this feature off, or how do I turn it off?
Thanks!

Yes you've been told right... furthest first. And you are right... pre ABS era.
The Left Rear Wheel (in this case particularly) is furthest from the master cylinder. The master cylinder is on the drivers side then the brake line is going to the ABS/HCU block which is on the passenger side and then going to the left rear wheel which is furthest from ABS/HCU respectively from the Brake Master Cylinder .

Thanks.
Are you sure about the order.
I've read in this NHTSA Safety Recall it is
NOTE: The following wheel sequence should be used when bleeding the brake
hydraulic system. The use of this wheel sequence will ensure adequate
removal of all trapped air from the brake hydraulic system.
 Left Rear Wheel
 Right Front Wheel
 Right Rear Wheel
 Left Front Wheel

didnt know any journeys had this option? 

Alpha obd program might be cheapest way rather than dealer.

Since you started another thread on the same exact thing, ,this one is locked. 

I need to get sometime to get that light thing ypu mentioned can you find one for me at wal mart online I don't have a harbor freight near me 

your link brings up Passion based Lubricant ....LOL

A 45 gallon drum full, to be precise. Seems appropriate for spending $800 for blue tooth fix.

That motor uses TWO thermostats. You say you fixed LEAKS, did you also replace BOTH thermostats?

Is your cooling fan coming on sometimes? Turn on a/c it should come on right away with compressor  I believe.
 
Your leaks meaning the thermostat manifold on side of engine was replaced.?

Locked duplicate thread. 

Locked triplicate thread. 

lmao. It's only a popup tent trailer, max GVW of 1750lb, but I like the blindspot mirrors in those and the functionality lol

OK, I'll ask... what are you planning on towing??? I know I'm not the only one wondering ?

What is it?  Did you try rock auto or the dealer? Get a part number from the dealer, google is your friend

i doubt it as the journey is really not a towing vehicle,you might find something by calling some camper stores or handicap vehicles shops