DodgeBruhBoy Posted 1 hour ago Report Share Posted 1 hour ago My car is a 2019 Dodge Journey SE 4cyl, the vehicle was driving fine and then parked after a short drive. 3-4 hours later I got back into the car, it wouldn't start, the battery appears to have died so we replaced it, it still won't start but now got the following codes: P0016 - Crankshaft/Camshaft Position Correlation (Bank 1 Sensor A) P000B - Exhaust Camshaft Position Slow Response (Bank 1) P0562 - System Voltage Low After replacing the battery: We deleted the codes, but they immediately come back and the vehicle still won't start. -Oil level is good -Wires and connections seem good -Gas in the vehicle Any suggestions? Quote Link to comment Share on other sites More sharing options...
5rebel9 Posted 1 hour ago Report Share Posted 1 hour ago Could you be a little more specific? Does the starter motor spin the engine but NOT have the ENGINE "fire up" OR does not even crank over the starter motor? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.