Jump to content

2late4u

Journey Member
  • Posts

    4,445
  • Joined

  • Last visited

  • Days Won

    459

Everything posted by 2late4u

  1. if its the turn signal or backup bulb ...it is real easy to replace it yourself with just a couple of flat screw driver, also some auto part stores might change it out for you when you buy the bulbs from them about a 10-20 minute job..here is a site that shows on how to to do it,,,or check out you tube as well.........https://www.paulstravelpictures.com/Dodge-Journey-Tail-Light-Bulbs-Replacement-Guide/index.html
  2. correct if they have led, which I have for the brake bulbs ,,the turn and back up bulbs can be replaced with regular bulbs or replace with led bulbs as I did,,.but mine has a sticker on the unit saying it has to be serviced by a dealership.... that said just remove your unit and see if it has that sticker if so you might want to see how much Thur the parts department it would be or call your local junk yard for a used replacement or check on amazon/rock auto parts
  3. that was my best Forrest Gump,imitation LOL
  4. and yet it still isn't fixed another lost day of work and throwing more parts at it, just saying sometimes the ceap ends up costing more in the long run . not trying to argue hope everything turns out great for you,take care
  5. Sure it would be more expensive but in the long run I believe I would take it to a dodge dealership as they have more knowledge on these vehicles small shops are just guessing most of the time.good luck
  6. 78 here today in alabamaaaaaaaa
  7. evidently not good as he never responded back, looked like a spammer
  8. act 1589 front amazon price $72.89...............act 5916 rear $61.49
  9. https://akebonobrakes.mypartfinder.com/............is the OEM supplier for dodge and the only pads I will use I order them off amazon for the best price....also replace your rotors as well
  10. It's great you have a friend that helps you out on the labor cost....
  11. 3.6 eng and 156 k on my 2014 as of now I had the plugs changed at the dealership at 100k and I had the service guy show me the old plugs and they still looked great condition
  12. well you didn't use oem and there are a lot of junk aftermarket parts being sold these days, but they shouldn't be your problem , from what you have wrote it would be something you did during the reassembly since you didn't infer a problem before doing this work
  13. as 5rebel9 posted above IF it hasn't been to long from the acc/repair get the body shop to check it out but as been said probally a wire at the door jamb is mostly the culprit or the door handle
  14. question ,,,,is it each window doing it with their door button? or are you saying it is happening from the drivers door control buttons? there has been a wiring problem that is in the lower drivers door jamb that the wires are breaking / or shorting out
  15. just keep a close on it and keep it filled till you fix it. might last you a long time
  16. should have just used a small black screw, it hides better that was the same spot I put mine as well,,,,LOL
  17. the ones on the passenger side break real easy, I had one replaced under warranty and then it broke again so I just held it in place and drilled a small hole thru the plastic trim and also the metal bracket behind it and then used a small black screw worked so good I did the drivers side even though it hadn't broke yet
  18. check out you tube for videos on this answer
  19. he didnt report back on whatever he found, so a 2 post wonder that doesn't help anyone
×
×
  • Create New...