Hello, All!
Just completed replacing the oil pressure sensor on my 2012 DJ 3.6. I also replaced the spark plugs while I was in there.
I was very careful and did not drop anything into the intake. that said, when I started it up, it began to rap back near #1. It sounds like a bent valve. Again, it was difficult to locate the rapping while the engine was running, but using my probe it sounds like it's back by #1. The engine is not missing, shaking or missing if I accelerate to around 3000RPM. I am stumped. I did nothing to that area except replace a spark plug!! With the probe, the Loud ticking almost seems to be stronger at the cam phaser.
Any thoughts??