Jump to content


Journey Member
  • Content count

  • Joined

  • Last visited

About HugoClement

  • Rank
    New Member

Profile Information

  • Region
    Canada Quebec
  • Journey's Year
  1. Hi, I had the EXACT same problem you're having and I found a pair of canbus cancellor that fixed it. They were specifically made to work with the TIPM for Dodge car. Here is the link of what I used. https://www.amazon.ca/gp/product/B072QCBQSM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
  2. If you tap directly into the interior light fuse you should be able to achieve that. After a quick Google search it seems to be the Fuse number 101 in the interior fuse box at the feet passenger side. For mine I taped into the bin power outlet fuse to have them on all the time when driving and it was way much easier than removing a bunch of trim pieces.
  3. Trouble with LED headlight

    For those who might come across the same problem has me, a decoder that specified working with TIPM module solved my problem.
  4. Trouble with LED headlight

    It was 3 different sets from 3 different brand. At first I thought the set I bought was too cheap but the 9005 of this brand dim for the DRL and go full brightness for high beam. And I tried with different LED chip (Cree/Cob)
  5. Hi, I want to install LED for my low beam but I ran into the same problem with every set I bought. I tried three different 9006 bulb and they all work fine when I open them without the motor running, when I start the motor they stay on for a second and the they turn off. I tried with a Canbus cancellor and with a load resistor and every combination possible of those but always the same problem. Anyone has any ideas of what I could do?
  6. HugoClement

  7. Canbus or no Canbus?

    I changed my rear turn signal for red LED, did not add load resistor and they work just fine. The first time I started the car after installing them it said that my light was burned but I left my turn signal on for about 30sec and everything went back to normal. It's been 6months and they only did that once while driving since then. And I used some cheap LED bulb bought on eBay.
  8. Led headlight bulbs

    Did you change your DRL/High beam too? I was looking to switch to LED but I'm worried about the bulb not being able to switch between these two intensities.
  9. When I had a 2012 Journey with the 4in screen I had the same problem. I took off the fuse for the radio for a night, put it back in and never had this problem again. Worth a try before going to the dealership.
  10. Casting

    There is the Lockpick Air that can do that. There is one other that I too have seen but couldn't find the name of it and seemed easier to use. If anyone knows about that other device, I'd be interested to know too.