apellefigliodapollo

151.476 vehicles involved in Europe (Fiat Freemont)

great work the tape matches perfectly the color!

made a video to show better how it works https://www.youtube.com/watch?v=SH1jY8yAZ6M#t=13

in Europe front fenders turn signals are mandatory too

Any shot of the dash kit? I'm curious like heck

The high beams option is almost plug and play if you use the extensions an the ebay relay

That's the result under the hood... looks almost factory, doesn't it? ;-) The second shot shows how i've used the extensions red arrow=oem high beam wire white arrow=where the relay wire is crimped to the the extension

@pacman i see you are from spain... you should buy this from ebay it's an unexpensive solution, the installation is very easy and it works fine! I bought two H11 and HB3 extension, so you can connect the relay whithout touching the OEM wires... FOR DRL ON FOG LIGHTS (very unexpensive) you need a relay like this (i think you can find it, for a couple of US bucks, in every shop of electrical stuff) then connect the wires from the relay to the positive of the two wires of the fog lights and the positive of one low beam (so the relay have the signal to switch off the fog lights) this is the electrical diagram: CREDITS for the idea: italian fiat freemont forum

I have a very unexpensive solution to share for drl on (led) fog lights too... just a relay and a couple of cables. just a couple of days...

I'll post photos and details just a little patience, i'm out for work for a couple of days and my freemont is in my garage at home (Anyway, finally i could use the lights swich in the "auto" position. When you start the engine the high beams are dimmed. When you turn on the lowbeams, the dimmed high beams turns off and so on... it works like oem drl)

Used 2 HB3 and one H11 extension connectors to let the oem wires untouched the relay cables are crimped to the extension

Relay on high beams dimmed to 30% 8 seconds after engine start, DRL turns on when i fire the low beams DRL turns off No loss of high beam functions the switch low beams ->DRL and DRL ->low beams is immediate A smAll video

had the same problem (and solution) on my freemont

Let's try with Amazon dot com http://www.amazon.com/6000LM-Xenon-Headlight-Replace-Halogen/dp/B00R8OQHC6

found this today seems to be a new led model, maybe interesting http://www.amazon.co...n/dp/B00R8OQHC6 what do you think about it?

if you have the chrome grille (and you like it) standard headlights is the right choice!

I'm glad to hear your wife was ok and no one else was injured! now... what about installing blacktop edition front lights?

No

This may help you you have simply to unscrew the 2 screws you can find where trere are the circles absolutely no need to remove the inner door panel!!!

There are 2 screws

Zamoon You don't have to remove inner door panel I've had wawed trims on both rear passengers doors and they changed the two trims under warranty Total time for the operation: 10 minutes and they did not removed the door panel.

in Italy... gas is 1,550 eur/litre that is 6,92 Us Dollars/Gal at today money change rate diesel is 1,450 eur/litre -> 6,46 Us$/Gal... gas taxes are about 65% of the final price... that's why you have 3.6 V6 pentastar on your Journey and i have 2.0 Mjet on my Freemont

http://www.dodgejourneyforum.com/topic/5733-check-these-out/#entry39862 Have a look

All of Italy... although in some regions the law is considered as a suggestion...