AJA
-
Posts
15 -
Joined
-
Last visited
-
Days Won
2
About AJA
-
AJA reacted to a post in a topic:
Shock assembly for 2014 Journey 4cyl
-
Thank you. It’s FWD. I went on Mopar website and it lists Magneti Marrelli as strut n coil assy - loaded suspension when I entered my vin#… equivalent in aftermarket?? I believe “performance suspension”
-
Hello everyone. 2014 Journey SE 4cyl here! I’m trying to find front shock n coil assembly - loaded suspension, but having hard time. Does any one know part number or OE replacement info? It seems my 4cyl 2014 SE model is different. Thank you.
-
Hello everyone. My 14’ DJ 2.4L recently started making knocking noise at startup when cold. I’m in So Flo so it’s hot here. Oil change every 3000 miles. Changed almost all belt attached components (idler, a/c comp, pulley etc) reason I mentioned this is bc noise is coming from around lower belt are. Someone posted audio clip, so is it common? Thanks! ✌️
-
Hello there! I have a 2014 DJ - 4 cylinder who just recently started displaying all the lights on the dashboard and intermittently shuts-off during driving. Has anyone experienced this issue? Thanks ?
-
That’s exactly my reasoning. Tks!
-
? good one, 5rebel9! Compressor and all components are less than 6 months old.
-
Hello All. Wife’s 2014 Journey 2.4L has had almost all cooling system components replaced. Also, replaced tensioner, pulley, serpentine belt, etc… Now, when turning car on, and immediately after, the A/C, it will make a clicking, tapping or knocking noise (can’t really describe it) The belt sometimes makes a slipping sound when the A/C is engaged, too. What could be making that noise? Someone mentioned the alternator pulley (which has not been replaced) Thank you for any suggestions, beforehand.
-
OhareFred reacted to a post in a topic:
Grab Handle Assist
-
Armando G reacted to a post in a topic:
Grab Handle Assist
-
Locosiete reacted to a post in a topic:
Grab Handle Assist
-
Thanks
-
jkeaton reacted to a post in a topic:
Grab Handle Assist
-
5rebel9 reacted to a post in a topic:
Grab Handle Assist
-
I believe they were part of the bracket. But, the holes were definitely behind headliner (marked, not pre-drilled)
-
Well everyone adding a GRAB ASSIST HANDLE is possible on the DJ (Dodge Journey)!! I finally installed it at a local upholstery shop close to home. Between parts, installation/labor, total: $125 • Support Bracket $29 on eBay • Handle $16 on eBay • Labor $80 at a local upholstery shop if anyone is interested, I can provide p/n’s Good Luck!
-
Noted! Thanks, John/Horace
-
Great advise Bud! Heading to junkyard tomorrow…
-
Yes. I’ll probably end up at the dealer. Happy wife, happy life.
-
Thanks, 2late4u! I’ve been to three shops and they won’t touch it. Reason been missing screw holes on headliner.
-
Hello everyone. New here! I have a 2014 Journey SE 2.4L that came w/o the grab handle or (osh) attached to headliner. Wife is very insistent on installing one. Bought one but have not been able to install due to missing screw holes. My model didn’t have it from factory. Has anyone install one or tried? Please HELP!
