-
Posts
5,827 -
Joined
-
Last visited
-
Days Won
473
Content Type
Profiles
Forums
Gallery
Everything posted by jkeaton
-
Backup camera alignment
jkeaton replied to gmiller's topic in Audio, Infotainment Navigation, MyGig, UConnect, etc.
Warranty work does directly cost the manufacturer. So they will try to save money wherever possible. Is it right? No. -
I'm sorry but I assure you it does sound just fine for our tastes. Yours may be different. It's like paint colors or tires. Everyone will have a different opinion. No worries and it's OK to feel differently.
-
Whining from fan belt(???) on start up
jkeaton replied to 2011DodgeRamJourney's topic in Electrical, Battery & Charging
It's the nature of the beast with these vehicles, provided you have the v6. They make all kinds of noise on startup. -
Haha. You gotta be a bit limber but you can reach them from underneath. Jack the front end up enough so you can crawl under and see where the bulbs are at. Then it's mostly by feel to remove and install. Took me about 10 mins per side. Including swapping the o-rings.
-
I was able to do mine from underneath without having to remove the fender liner.
-
Yes. It is normal.
-
Yeah. I took the o-rings off the OEM bulbs and used those. Without o-rings, you will run the risk of moisture inside. It's not running through water that causes it, it's the temperature difference when the housing heats up and cools down. Hopefully LED's don't get hot enough to cause that problem.
-
If its on top of the tank, there is no other way.
-
9006 LED bulbs
jkeaton replied to hockey_puck's topic in Glass, Lighting, Mirrors, Sun Roofs & Wipers
I have Led 9006's. Work out well. They say all weather so I assume they would be in in freezing temps, or they would come with a warning. -
12 volt power fuse keeps blowing
jkeaton replied to bobcat98092's topic in Electrical, Battery & Charging
Should be fuse descriptions in the owners manual. -
Just hope you don't screw something up. Your warranty (if you have one) will be voided.
-
If you are referring to retuning, such as superchips, Diablo, etc, there is nothing available off the shelf.
-
Could be. Three different manufacturers got their molds wrong then.
-
My factory system sounds great.
-
Or when he hits the nitrous and loses control from torque steer.
-
^^ new cool kid on the block.....
-
True, but is also takes them time to crack the PCM on newer vehicles. For example, superchips and diablo still don't support 2015 models (or not all, yet).
-
Supports 3.5 & 3.6 for 09-12 models and 2.4 for 09-10 models only for now. http://www.hptuners.com/products/vcmsuite_vehicles.php
-
Anything is possible with enough time and money. Never been done on a DJ since I've owned one (09). Go for it.
-
Check engine light on-no odometer code
jkeaton replied to mthurston0001's topic in Engine & Transmission
Welcome to the forum. Drive "cycle" means get in and drive it a few times. In other words, start it, go for a 15-20 minute drive, stop and turn the vehicle off = one drive cycle. By asking "is there anyplace to get the OBDI codes", do you mean a list of OBDII (your vehicle is OBD II) codes and what the mean or how to retrieve the codes from the vehicle? If you are looking for a list of codes and what the mean, or the meaning of a specific code, ask google, plenty of online sites can assist in code diagnostics. Here is an example: http://www.obd-codes.com/trouble_codes/ If you are asking how to retrieve a code, it has been stated several times in this thread. Dealer, auto parts store or buy a code reader. -
Very noisy when driving through puddles or snow
jkeaton replied to ladybug's topic in Exterior & Body
They are indeed very thin wheel well liners. Blame it on cost and weight savings. I tend not to dwell on it.
