silenze

It has to be the 4cyl.

As mentioned above i would skip it and get an sxt with the 6cyl.

Yes, they bulbs are led. Ill give that a try and mention it to the dealer when I go back to have the Struts and mounts replaced.

The suspension noise performed great when it needed to and like others here have said, they plan to replace the struts and mounts.

However I picked my car up to bring home until the parts arrive and found this. Was told its ok to drive for now. Man,,, my stories with this car just do not end.

20160428_175447.jpg

Classic dodge quality

7400 miles and parts are falling off

Park in a garage

I picked white for my rental here in Florida.

Oooo 2009. We will be seeing lots of posts from you

Try looking at the other headrest???

IT'S A JEEP THING!

???

Im glad it worked out, and im glad your happy

You have a great minivan. I assume you had an 09 or 10 journey. Those were terrible

Also where on the hatch is it bubbling? Mine is on the corners that always stick out on the bumper. Its actually starting to rust. I got a 2011

Try facebook or twitter. Companies care more about their social media image

Just like bamfrank said

ou need a radio and an 8.4" screen and a new upper bezel at the very least.

If you dont have auto climate you need the lower bezel and temp sensors and a light sensor.

Its not just changing the screen.

The radio is located behind the screen/controls

From what i understand The temperature will not correctly display and the sliders will not move on the screen without the sensors. Have you done the 4.3 w/o auto climate to 8.4 swap camper?

It displays the message oil change due when you start the car. It is also in your message center.

You would never see it if your dealer changes your oil and resets the counter.

Also i dont know what he is talking about because my 2011 doest show how much oil life is left

Sounds like they really screwed up if they have to keep his car

Have to add, no flickering, no canbus or resistors required, work straight out of the box, but the connectors on both had to be turned around... oh, and they sound like someone is running a shop-vac in the distance...

You need the correct sensor + the switch for Auto Lights. And, auto lights has to be listed as a Sales Code, or NO dealer can activate them. I have the sensor and switch installed. I'm just waiting for the Sales Code to reappear on the Sales Code List, or whatever they call it.

I thought the only guy that had it enabled his dealer opened a star case to have dodge add it

Ouch

I havent heard of any shortage of ram trucks or jeeps. I wonder if the capacity is really needed. I think its very short sighted.

But we all knew fiat was going to run Chrysler into the ground. Its actually taking longer then i expected.

I want to put tank treads on mine. And install an ejection seat.

Not really

Hocus-pocus

You dont have to set your clock?

That is amazing

I have to set mine evey week because it gains a few minutes . Sometimes a few hours.

Great post. Pacman.

I agree

The rear of mine squeaks/groans with just the slightest touch on the bumper.