Tadek Janczykowski

Thank you, it has to be reset after taking the head off.
In case anybody need it - those values are correct.

Guys, I Need urgent help with valve lash in 2.4 09' DJ. Cylinder head is ready, but my mechanic asked me what are the proper values of valve lash. He called both Dodge and Fiat and they do not want to tell it...

Please help, so I can finally drive my baby home
EDIT:
What I've found is:
Intake..................................................................................................................................................................................0.17 - 0.23 mm (0.006 - 0.009 in.)
Exhaust...............................................................................................................................................................................0.27 - 0.33 mm (0.010 - 0.012 in.)

Is it correct?

Yeah, I've read about the Katzkins... However I can buy a set of seats for aprox $400 and Katzkins are at least twice as much...

BTW: I've dig the e-bay and found some used OEM leather covers, does it mean you can take them of? So in case the electronics etc won't fit I can just "switch" the covers?

There are a lot of wires on the right side. However I guess they are for the airbag?

Im so sick of cloth...

Yeah, Both of them have airbags.
How about the electonic settings vs manual one? Is there just a cable that I should connect or its more complicated?

Hi guys, I own DJ 2009 SE. i would like to replace seats with the leather ones from R/T. Is it just plug and play or there are specific sizes etc ? Those leather ones I've found are from 7ppl diesel 2009. The driver seat has electronic settings, mine is manual.

Is it even possible?

Well - it was the same as above. Thanks.

Well - it was the same as above. Thanks.

dhh3 is right as my rear wasn't working this morning but the fronts were and the temp was only 28 f. i have been using summer fluid but last time added i used winter fluid but the plastic tank is big enough that it was diluted so the rear still froze up a bit. it started working latter in the day will have to go to the auto store and pick up some concentrated fluid to keep it from freezing up again. might be your problem as well...

Guys, my rear washer stoped working.

1) I can still hear the pump
2) The front is working just fine

Any ideas what to look for?

I had a same issue - all lights flashes, radio working etc but it does not start. Well in fact it does…. after fifth time or so. The solution was easier they I thought - starter solenoid relay - 10$.

Hope it helps someone