rtlucht Posted August 3, 2016 Report Share Posted August 3, 2016 I am having an issue with my 2010 Dodge Journey 2WD 3.6L engine. I have check engine light for the camshaft position sensor. I have replaced it twice and cleaned the wires ends on the harness. It works fine for a day or 2 then its back. If I unplug the wire-harness and plug it back in it goes away for a while but comes back. i am also getting errors on the TPS voltage correlation. Any help would be appreciated. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 3, 2016 Report Share Posted August 3, 2016 Yours may fall under the recall for one of the cylinder head replacements. I have read about this on the forum, but the problem had been fixed by 2014. Quote Link to comment Share on other sites More sharing options...
bigtsr Posted August 3, 2016 Report Share Posted August 3, 2016 2010 did not have the 3.6 Pentastar which that recall for the head was issued. dhh3, mfeel and 2late4u 3 Quote Link to comment Share on other sites More sharing options...
jkeaton Posted August 4, 2016 Report Share Posted August 4, 2016 This. ^^. 2010 is a 3.5. dhh3 and 2late4u 2 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 4, 2016 Report Share Posted August 4, 2016 (edited) OP said 3.6! Just trying to help him out. I have no idea when the other V6 engines in production were being phased out; all replaced by the 3.6 Pentastar. In 2011, both the 3.7 and 4.0 (based on 3.5) were still being offered in the Nitro. There was no 2012 Nitro, but the 2011 Production Year ran through December 2011 to use up all the remaining parts! Edited August 4, 2016 by dhh3 Quote Link to comment Share on other sites More sharing options...
jkeaton Posted August 4, 2016 Report Share Posted August 4, 2016 Well, now you know dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 4, 2016 Report Share Posted August 4, 2016 So, is 2011 the first year that the DJ got the 3.6? mfeel 1 Quote Link to comment Share on other sites More sharing options...
mfeel Posted August 5, 2016 Report Share Posted August 5, 2016 (edited) @dhh3, yes! DJ used to have the 3.5 V6 for 2009 and 2010. Later on, from 2011 until now, we have the Pentastar 3.6! 3.5 had 235 horsepower, and now as you know, it pumps up to 283 horsepower! Edited August 5, 2016 by mfeel jkeaton and dhh3 2 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 5, 2016 Report Share Posted August 5, 2016 Almost too much HP. I can spin my front tires at every stoplight! jkeaton and mfeel 2 Quote Link to comment Share on other sites More sharing options...
mfeel Posted August 5, 2016 Report Share Posted August 5, 2016 Hmm, used to happen with my old 2.4. Not anymore with my AWD! dhh3 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.