RyanDavidPonter Posted June 25 Report Share Posted June 25 Hi. Has anyone ever removed their front wiper arms? If so, how did you do it? I’ve been trying to get mine off so I can realign my wiper arms since the driver side wiper keeps hitting the A pillar because of it being too high when in the park position. I tried using a wiper arm puller and it wouldn’t fit because of the cowl panel, and then I made the stupid mistake of trying to force it to fit and then ended up cracking the plastic on the cowl panel. Any suggestions? Quote Link to comment Share on other sites More sharing options...
John/Horace Posted June 25 Report Share Posted June 25 I did two years ago. If never apart the taper fit needs lots of force to separate. I have a really old steering wheel puller that fit into the tight recess. Removing without damaging is the hard part. Harbor Freight has some unusual pullers, that are cheap enough for one off use. Cowling plastic would be cheap from auto recycler if you are replacing broken plastic. RyanDavidPonter 1 Quote Link to comment Share on other sites More sharing options...
RyanDavidPonter Posted 15 hours ago Author Report Share Posted 15 hours ago I was able to get the wiper arms off and reposition them! It took a while for me and my buddy to figure it out, but what we did is have the nut loose on the thread, and then just hit it with a hammer, and then wiggle it back and forth. It then came off! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.