guidoyanovich Posted July 31, 2010 Report Share Posted July 31, 2010 Hi all, Does anyone know where this connector is on the SXT Journey? Thanks, GY Quote Link to comment Share on other sites More sharing options...
OhareFred Posted August 1, 2010 Report Share Posted August 1, 2010 Should be under the steering column in plain view. Now need to remove any panels. etc. Quote Link to comment Share on other sites More sharing options...
warbird24 Posted August 1, 2010 Report Share Posted August 1, 2010 As per the OBD II Specifications it needs to be within 2 feet of the Steering wheel unless exempted. I have not gone looking for mine but in most cases on Chrysler Products they are on the front edge of the underside of the dash. Note: There is no rhyme or reason which direction or orientation for these connectors. Quote Link to comment Share on other sites More sharing options...
alye Posted August 16, 2010 Report Share Posted August 16, 2010 I've got the R/T, but I imagine the connector is in the same spot. Almost directly under the steering wheel, right behind the dash and in line with the edge of the dash. Easy to access both from driver's seat and from outside the car on the driver's side. Quote Link to comment Share on other sites More sharing options...
acebass Posted January 10, 2011 Report Share Posted January 10, 2011 I have a 2010 SXT. The diagnostic port's at the bottom of all the plastic covers, right by the steering column. It's pointing down, so you either have to connect up a reader by sense of touch, or crouch upside down. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.