Jump to content

Generic Backup Camera for Uconnect wiring connections


Recommended Posts

Hey guys purchased a $14 back up camera from eBay 

and was able to trace what wires were needed to connect to my radio,

The power to the camera will have to be pulled from a backup light in the rear of the car

that would be the red/black plug. the video signal is a yellow wire coming from the extension

 

This is on my 2017 Dodge Journey,  butit should work on 2011- 20?? Uconnect radios

I show the black plug that the scrap yard left on my radio, if your radio did not have that you may need an adapter.

Experiment at your own risk !!

IMG_20230210_110353098_MF_PORTRAIT.jpg

IMG_20230210_110440512_MF_PORTRAIT.jpg

IMG_20230210_111609960_HDR.jpg

Link to comment
Share on other sites

 

 

I pulled power for the camera directly from the radio positive and used one of the screws from the rear windshield wiper motor for a ground

temporarily.

 

Mods ! This forum doesn't allow for editing a post after a while, makes it hard to correct things, turns everything in to a long tree of replies.....

image_2023-02-12_070306952.png

Edited by Sgt Beer Belly
To see how long after posting I was able to edit
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...