ltdjourney

now black out back lights and put some tint on front lights to darken them as well did that with my 2014 dj ltd. also plastic dipped my wheels, front grill, door handles, roof racks on a white journey ltd. wish I could post pictures but can't seem to them to work

Same here 18000kms no problems yet on 2014 ltd

Anyone know how to remove fog light vinyl unit all together . can it be pried out or do I have to remove liner to get to them . Thanks for your replys.

looking to replace my flog light bulbs with something brighter any idea what to buy to replace them with . Thanks for your replies.

thanks bud check it out 2014 limited

I'm interested in a set

no problem with my 2014 limited on hills ,but I notice that if I don't push on brake firm after I stop it will drop back a little other then that it's fine

should be in box in back of DJ with matts

why don't u just spray front of DJ with plastic dip any colour u want then when u get back home just peel it off.

did u get part number from dealer for light wiring harness. found lights on ebay but no light socket Thanks for ur reply

Needs more black on it like mirrors, door handles. and the chrome in . but the truck looks great just my 2cents worth, but enjoy truck

tape of a square around letters spray letters lite coat at a time until u get what u want let dry for about 15 mins remove tape and pull dip off make sure u pull away from letters and use a fine tip to start dip inside letters and pull it out just like that and clean of rest of dip on truck with a clean rag or use ur hand and finger. I have done wheels ,letters,grill,door handles,square panel around rear plate on lift gate.alsopainted my tails lights with paint .good luck you can't screw up plastic dip because it removes easy.

I also did the area where my license plate with dip roof rails ,wheels ,front grill,door handles,and all the chrome lettering on truck.

Thanks for ur reply try that next mod maybe

did u use one 44 muffler or two?? Thanks

something like I have done to mind with a 3"od x 3" Long right of tube coming of intake .

me too 2014 v6 nothing in tube . I put a c I a filter in . I bought a rubber connector at home depot 4" long 3"id fits perfect used a tie strap to hold it into air box. love the sound

thanks for ur reply looked at and off the came with a small flat screw driver . rails of and painted/. thanks

caps are easy to remove by reaching in you will see some little black plastic pieces holding caps in place use a small flat long screw driver and flip them up over and the cap will slide off . I think there are about 5or6 of them on bottom ,top ,and one maybe on side good luck

Bowmanville Ontario

anyone remove the roof rails from a 2013 dodge journey.how do u remove the plastic caps on each end of rails . Thanks for any replies.

dipped them black on white journey to match wheels grill and silver on front I like it get a lota looks from other white journey

want to paint them , figured it out removed caps of handles easily and plastic dipped them . no problems snapped right back on . harder to remove because u have to be careful not scratch caps or door ,no problems with door locks .Thanks

Handles done like them

outside handles sorry about that I wasn't thinking right thanks