Camper

This is the photos, that I am talking about, sorry about the photos is not clear, it hard to drive and take photos at the same time

You cannot get text on display/screen when you driving, it only option available is listen. So it will be interrupting the radio, when you listen. However, if you do have connected lockpic, then you can read text message, without interrupting radio.

You answer to you question The Travel Link and Sirius Traffic Data is not available in Canada.

Same things happen in Ontario, traffic icon show up and then disappeared again. It only working in USA

gues i have to go see dealer, for this issue

Pick up my new 2016 Crossroad a 10 days ago, discovered a little bit delay on Instantaneous Fuel Economy.This display shows the instantaneous MPG or L/ 100 km in bar graph form while driving. This will monitor the Fuel Economy gas mileage in real-time as you drive and can be used to modify driving habits in order to increase fuel economy. On my car bar graph start show up the fuel consumption and economy at 60 KM/H. Does any one experience this issue at any year of Journey, including 2009;2010;2011;2012;2013;2014;2015;2016?Does this issue year specific, or some sensor have to be replaced, to resolve this issue?On my 2012 Journey Crew, I do not have such a delay, for instantaneous MPG or L/ 100 km in bar graph.

You can open same installer in internet explorer, it built in Windows 10 as well. On your EDGE click on top right corner(tree dots) a new menu will pop up, then you should see on that menu "Internet Explorer", it actual IE, not EDGE, then in IE you can open any page in "Compatibility Mode"; under settings.Hope this help

I do have above tool and used on all my cars, to turn some options on and off, or adjust any settings, you have to bay a full version of the software ($700.00), with out that it really basic scan tool. However it allowed to see the following: coolant temp; oxygen sensors, and few more, plus it allowed you to turn off "check engine" light and provide clear information about code that is triggered the light came on.Also you can print that information, save in Excel spread sheet. However, you have to download every year updated version of the software.I hope it help

Thank you, I will contact to my dealer

dhh3, do you know, where i can get the part ( P/N 68026722AA.), you are mentioned before.

Thank you for the clarification.

No, the hitch do not rub on the black plastic pan at the bottom of the bumper.

Do you have a picture for it, or where I can by?

Just, get same hitch installed on Crossroad-2016, and no cut at the rear fascia.

I am looking for the proper adapter, that it goes to the hole. I am think it should be some kind of power outlet for trailer connection.

Does any one know the proper part number, or wire adapter for trailer hitch.

The trailer hitch added as option by dealer to my new Crosssroad 2016.

Here is the manufacture part number:

Mopar Manufacturer Part Number 82213561abx

Also, please see attached photos.

Went to dealer to day, dealer replaced right catalytic converter. Under Federal Law in Canada, catalytic converter covered under warranty for 10 years.

Booked appointment with dealer on Feb.27. Let you know, with resolution.

I do have 111 567 km. on my journey.

So, I am not sure if it will covered under warranty.

How long is warranty for Catalytic Converter? Somebody told me is 160000 km,is this truth?

On my 2012 journey, MIL just came on, run OBD-II scan tool and what I get:"""""

ducati_996sps,if you do have Satelite radio,then you do have gps ntena built in.

I get my kit from this web-site: http://www.car-part.com/cgi-bin/search.cgi

I still have the original radio unit for dodge journey(4.3S) for sale.

Check this forum:http://www.dodgejourneyforum.com/topic/3482-installing-84-uconnect-actually-doing-it

That with navigation.

I'm getting same whistle noise while accelerating.

Maybe it pulley ball berring, or alternator berrings.

Total for the parts and shipping is $768.00. That price including the screen with the besel,lover stack(buttons and diales) with SD slot,the radio it self.

Plus $45.00 for the re-configutation and obtaining the code.

So,the total is:$813.00

dealer obtained correct code and re-configure the PCM. Success!!!!!!!!! Radio start working and all futures as well.

Thank you everyone for the information provided on this topic.

If any one is interested,here is the link for the obtaining the code for the radio:http://navrepair.com/collections/programming-and-anti-theft-unlocking/products/anti-theft-code

Those guys can provide the code without the VIN number and then the 8.4N/8.4 will work and not married to the car VIN.

Check if the software/firmware update is available for your vehicle: https://rsur.extra.chrysler.com/rsur/Uconnect.do