Jump to content

Dean H

Journey Member
  • Posts

    380
  • Joined

  • Last visited

  • Days Won

    44

Everything posted by Dean H

  1. There is cam-crank variation relearn procedure. Required, when you change those sensors and VVT camshaft solenoids. It's a scan tool function. Try this and post back here. Dean
  2. 2016 DJ 3.6L engine 62te transmission Good question. Your in the normal operating temperature range. My average transmission temperature is around 175 F. Dodge technical transmission specs. 1) Cooling fan turns on at transmission temperature of 204 F. 2) Transmission temperature 240 F is overheated.
  3. Hi John H. These are the specific codes in the 2016 DJ service CD. Electronic Throttle Control (ETC) lightning ⚡ bolt warning light. ETC LIGHT Illuminated --- TP sensor codes P0121, P0122, P2135 ETC codes P2110 Accelerator pedal codes P2115, P2116, P2166, P2167 ETC LIGHT FLASHES ----- TP sensor code P0123 ACCELERATOR PEDAL codes P2122, P2123, P2127, P2128, P2138 ETC LIGHT FLASHING ---- ETC codes P2100, P2101, P2107 P2111, P2112 P2118 Dean
  4. One thing, that is a problem on the Journey. There isn't enough engine to chassis ground straps or cables. The main engine battery ground is a small 4 gauge. Should go to a 2 gauge. Add a 4 gauge ground on the opposite engine mount. 2 gauge if it will fit in. Dean
  5. I'm posting the 2016 DJ service CD. Trouble shooting chart. Read carefully.
  6. Thank you whole foods for the WiFi. I hope this helps.
  7. First thing on a Journey. A known good and tested battery. When replacing the gas pedal, did you use the scan tool? There is a apps relearn function required.
  8. Would you list the specific codes it's giving now?
  9. In this section read my post. Scroll down 5 post's. " New FOB kit and programming complete"
  10. For reference on the a\c drain hose. You can easily access it inside. Located next to the gas pedal. You remove a small plastic panel. It has one trim push pin that goes up into the dash.
  11. In a emergency situation, when you need to put the automatic transmission in neutral. 1) open the console armrest. Inside by the usb- aux port. There is a square tab, that pops out. Mine is silver in the picture. Hard to see black. 2) using a flat screwdriver, push in through slot. See picture 2. Until you contact the pink lever. You will pry up on it. Hold it up and the shifter can be moved.
  12. First thing. You need to find a shop or someone with a scan tool. That has the capabilities to read modules and can activate and test individual components. Simple code readers are basically a digital reference. Dean
  13. With scan tools. They start at basic code readers. Go up to bi-directional controls. Where you can actuate components with it. Relearn procedures etc. You need a shop with good scan tool capabilities. Ask them up front. That can check and test abs wheel sensors. ABS module testing as well. They can solve this the quickest.
  14. Here you go - U1110 Lost vehicle speed message. U1120 lost wheel distance message U1412 implausible vehicle speed signal U11bc lost brake switch message U0416 implausible data received from ESP. Electronic stability program. These are all signals that come from the ABS (anti-lock brake module) to the PCM. They are missing. You need to check out the wiring to the abs module. Wheel sensors too. After that, I would replace the ABS module. On the journey the ABS and the hydraulic control unit are combined. Called the integrated control unit. ICU. Someone with a capable scan tool. Has to initialize and bleed the ABS. After you replace it.
×
×
  • Create New...