Yoeman

Test

Dodge Journey 2012 rt3.6 abs traction and stability dash lights on codes shows left front speed sensor but we replaced it with a new Oem and cleared the code No fix Does the speed sensor pick up from the bearing or cv as I can’t see any tone ring. should I replace the bearing and hub to see if the sensor will work again but the bearing is fine. Ive talked with 3 dealers and not on can tell how the sensor picks up on the wheel speed Wiring to the abs module look go and tests please offer any help

Help 2012 3.6 Journey pushed all the engine oil into the cooling system and it bubbles out of the overflow after a 10 mile drive. I do know that engine has been reported as a big problem with heads cracking yet it’s not under warranty because of rebuilt status. Would it be correct to consider the oil cooler as potential cause or am I dreaming Engine runs fine

It was hit in the front right and bent the pulley Looks like I need to drop the front axle and lower suspension plus try to get the exhaust off What a design!!!! Any info from the service manuals?

Could some one please post on how to remove the power steering pump on my 2012 Dodge Journey 3.6 I'm looking at it with no clue as I can't even get my had between the fram rail and pulley Thanks

Thanks very much for the info I did manage to remove the valve body and replaced the solenoid pack with one from ebay but now the service awd is on and I can't get the transmission to shift in sport or manual mode Not sure if it will shift on a road test as my power steering pump pulley has a bend in it so I'm now trying to figure out how to get that out. Any info on that would also be great When the engines running at idle in park I can hear a clicking noise every 30 seconds or so in the solenoid body I suspect a broken wire but still looking

does anyone have info on how to remove the valve body solenoid on my journey 2012 3.6 It was damaged so I want to replace it but have never done this before Any links on ides would be great