John/Horace Posted November 14, 2021 Report Share Posted November 14, 2021 Driver door developed quite a clunk on opening. Found a lot of play in lower door hinge rivet part. Awkward access and not a threaded fastener I could replace. Mopar part from Rock was $77 can plus $14 shipping. Swap out took about 30 mins using a floor jack to support door. Lining up so latch meets cleanly took extra time. Open end 13mm wrench and 1/4” drive 10mm socket and small pry bar. Nice and quiet now. It was a sales rep vehicle bought used, drivers door was also backed into once. Dent was fixed. Match marks for old hinge help aligning new hinge faster. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.