Cody Chornobey Powley

i use the jet black tire coating from turtle it lasts me atleast a month i might try that wipenew tire shine and see how good that is,,,i used the wipe new for the timr on my elantra and was amazed at how glossy it made the black plastic

I did the windshield myself with 5% and took it to a guy who do my other vehicles, got him to match factory with 18%. Close enough he took the windows completely out, so no worries of it peeling up when the window is closed all the way and when I push the button for it to go down I have no worries cause there is tint about 2 inches below the window trim

These are my DRLs, the high beam bulb is still in place but just for looks, I have it unplugged and made up a fmale connector to the to Mt higbeam solenoid for my projectors. Fogs also are switchback for turn signals

Yeah im going to do them dark. Almost blacked out..the led tail lights shine through five coata of vht, dis my buddies avenger few days ago. Super dark but can still see them perfectly during the day and evening

Yea I like it too, loved the red also haha but its a nice change

The bottom reflectors got some gloss on them.also. trying to find some kind of lighting to mount to them as reverse lights I was going to use eagle eye LEDs and drill though and have about ten on each one. The same ones I had on my bottom grill before my accident. Those would be awesome. They give a wide output and low to the ground lights everything up. I'll be sure to take some pics of wiring and function once it's done

Decided to take an update pic of the mud gaurds installed, no more red, kinda miss the red but also digging them in gloss black. I think once it's all done it will come together and I'll like it even more. You guys like them in red or black?

Yea it's going to rain tomorrow.so I decided.not to wash it haha, I didn't remove it from the bumper. Lots of tape and plastic wrap. About an hr and a half of prep work, light sand over the plastic and cleaned it with alcohol

The other day I painted the letters black and today I painted the back bumper and decided to ditch the red mud guards and go gloss black, once those are done and ready to be put back on I'll post a pic, still gotta do the front bumper and side skirts, after seeing his new diffuser all gloss I had to do it lol

Its a resonator but a tip version. Cut out alot of high pitch tone, its just vinyl pin stripe, but since the fog light turned out great I'll be doing the rest of them all gloss black, decided to keep my diffuser how it is now cause I didn't realize my front matches the back lol. I'm actually taking my journey into the shop, needs a new front axle on the passenger side, but yeah once I get back from my road trip in three weeks I can paint the rest of it

I get about 13.2l per 100km in town and about 7-8l per 100km on highway. If I were to go smaller rim ID get a fuel mavericks with a little offset

Two days ago I decided to see what the fog light covers would look like gloss black since your diffuser looks amazing gloss black, they actually turned out amazing and such a huge difference. In the pic yous can see the gloss black I painted and the black plastic on the bottom of the bumper, and my magnaflows are great now. Still too quiet for me but any louder and drone gets worse, might eventually remove the stock reso again and maybe try an aftermarket reso or another small muffler from single to dual and run new pipes to the magnaflows at the back.I was talking to a guy and he said the back are resonators and the middle pipe under the passenger side is the muffler, he pretty much called me stupid and says he is 100% that the backs are resonators and the middle is the muffler, anyways he posted a video and says it sounds great and with very little drone, I doubt it, I bet the drone is intense during shifting which is often and that alone would get annoying ha-ha. But when I installed the 3.5 inch resonated tips it made is deeper and not as loud. Im content for now I guess haha

Mpgs in a jee with big tires is terrible tho. Not looking for a lift but certainly somewhat aggressive tires, I go on dirt roads often and these stock rubbers suck

I'm buying a spare diffuser soon and going to do my own. Should cost me less than 150 to buy a used diffuser bondo and paint got some tricks up my sleeve for this one.

So what are you running for exhaust?

What are you running for exhaust? Besides tips.

Point me in the direction to get this ha-ha. Looks sweet. Almost like the SRT grandcherokee diffuser, I think it would look good on my blacktop

I would just tap into the break lights and turn signals and makenmy own lights if i were you guys. Maybe take you and hour to tap into the wires and make a harness

I might actually take the box out and cut a three inch hole and run some abs down to the lower grill just for better intake instead of being behind the rubber under the hood and use a drop in k&n. Would my idea work??

When it comes to my personal lighting I like my projectors with hid, my gallery speaks for itself on what i prefer for lighting performance wise, hid projectors will out perform one led bulb in a housing, now led projector on the other hand is damn close to hid projector in performance, those led bulbs you see online that say projector led are nonbetter than, a flashlight

These are custom I have projectors in my fogs with switchback halos, 300 for projector bulbs hid ballast switchback halo

Panamera led drl in my headlights with mini h1 7.0 6500k xb hid bulbs, in my fogs I have xsb switchback turn signals

Yeah if I were to do my tails again it would be with film. Easy to apply with a heat gun and some soapy water to make sure no bubbles are in. YouTube is awesome for videos btw

If I feel like driving in manual mine kicks into 1 most times when I'm sitting at a red light, sounds good also with my magnaflows. Downshift sounds sweet too but funny at the same times cause it's a man van haha. I've won a few Street races around town in manual second and third gar if you step on it feels great hahah

Not sure where you get the idea of having to aim m projectors down lol. They are at the exact same height as stock! If anything has to be adjusted its the projector its self, stock lights I parked 25 feet away from my garage marked my lights after the retrofit go back to the wall at 25 feet and put them in the same spot didn't lose any distance if anything I gained a massive amount and width its crazy, on a highway I light up five lanes wide, the step in my cut off is for on coming traffic #winning