travis9935

Lol I broke me battery sensor off when I changed to my Optima battery back in December! It did the same as yours, but went away, they wanted $100 for it! I asked what it did and if it was important, nobody knew! No problems without it!

Why not just leave the resonator in and go straight pipe back from that? I had the Magnaflow kit on my 12 Avenger, I removed their resonator after the install, sounded alot better! More deeper! But I also had straight thru mufflers on my dj (see my pics) and it sounded even better than my Avenger. But I had to remove them cause they interfered with my new hitch. But I will prob put them back on cause I miss the growl! Turns out I probably won't be using my hitch very often.

Amen! There cuz!

Is there a way for us to know when there are tranny updates? Mine sucks also, but 4 months ago they said it was up to date. I batteled with them on this issue when I had my 2012 Avenger 3.6. But at least that got a lil better!

Is there a public database of TSB's?

Not sure if anyone else has tested the evic mpg Avg but it's always off on mine, shows higher than what you actually get! This was tested by top off and reset the trip, plus backed up by GPS trip. It's close but not 100% accurate.

Why not just leave the resonator in and go straight pipe back from that? I had the Magnaflow kit on my 12 Avenger, I removed their resonator after the install, sounded alot better! More deeper! But I also had straight thru mufflers on my dj (see my pics) and it sounded even better than my Avenger. But I had to remove them cause they interfered with my new hitch. But I will prob put them back on cause I miss the growl! Turns out I probably won't be using my hitch very often.

Op so did it downshift every 2 minutes? Mine on the interstate seems to downshift when it even sees a incline coming! I couldn't even imagine what it's like with more weight behind it. Apparently the 3.6 with its high (Highway milage) gearing just doesn't have enough low end torque to support the weight. My 2005 Xterra with 33" tires had 280ftlb torque and that thing could keep gear and speed towing my quad and loaded down trailer & loaded back end up large Hills @ 75 mph. Anyone else notice theirs doing this?

Finally found some 20's that fit and look nice without breaking the bank! $680 shipped!

Why would you want do that? Most people try to get away from crappy oem audio!

Finally found some 20's that fit and look nice without breaking the bank! $680 shipped!

So This Is My First Post Ever. Im Very Exited To Finally Learn A Few Stuff And Get Ideas To Use In The Future. So After Looking Around In Various PLaces Looking For A Way To Change Out The Door Speakers, I Just Couldn't Find Anything. I Mainly Didn't Attempt To Figure It Out Myself Due To Fear That I Might Break A Clip Or Something Or Scratch Any Part Of The Door Panel. I Finally Decided To Figure It Out Myself And I Felt Like It Would Be Good To Post It Up For People That Are Going Through The Same Struggle That I Went Through Or For People Interested In Changing Out The Speakers. The Tools I Used Were
*10mm Bit For The Socket Wrench With Extension (Remove Bolt Behind Door Handle)
*Impact Gun/Screwdriver
*#2 Phillips Bit (Remove Screw Behind Door Handle Next To The Bolt)
*T30 Bit (Remove Screw Underneath Pull Door)
*T20 Bit (Remove Speakers)
*Plastic Pry Tool ( Pry The Door Panel Starting From The Bottom)
*Micro Screw Driver Flat ( Remove Cover Behind Door Handle And Pull Door)
1st Step Was To Take The Micro Screw Driver To Remove The Cover On The Bottom Of The Pull Door And Behind The Door Handle
2nd Step Take The 10mm Socket Wrench And Remove The Bolt Located Behind The Door Handle
3rd Step Was Take My Impact Gun With The #2 Phillips Bit And Removed The Screw Located Behind The Door Handle Next To The Bolt
4th Step Was Take My Impact Gun With The T30 Bit And Remove The Screw Located On The Bottom Of The Pull Door.
5th Step Was To Take My Plastic Pry Tool And Pull On The Bottom Of The Door Panel And Work My Way Up On Both Sides Of The Door Panel.
6th Step Was Pull The Door Panel Up And Remove The Door Handle Which Is Just Clipped To The Door Panel And Also Disconnect All The Harness Cables ( Windows, Locks, Mirrors, ETC....)
7th Step Was Take My Impact Gun With The T20 Bit On It And Remove All 4 Screws Holding The Speaker And Disconnect The Speaker Harness
8th Step You Can Do It How You Please. You Can Either Buy Speaker Harness That You Wire To The New Speaker And Just Plug N Play Or You Can Just Splice The Cables And Attach With A Piece Of New Speaker Wire, Solder It And Tape It Up. After Thats Done You Can Now Put Everything Back In Its Place.