Baumrb

Hey again everyone! Hoping someone could answer another question for me- so I just started experiencing the “dodge AWD” error messages that are coming and going... from what I read I’m assuming speed sensor but have a question about reading the codes- ars the servuce codes stored stored for our journeys? Reason for my question is I brought my Journey in to an auto store to read the code and they attempted but their thing only reads engine lights... so I borrowed another and this one also didn’t read any codes and that one apparently had an abs reader capability... anyone know now why it wouldn’t be reading? Are service codes stored if not active when being read? Is there anything specific to the Dodge Journey that I’m missing? Thanks

Thank you much

Thanks!

Hey! So im sorry as I feel like I’m always posting on popular topics ...but I just can’t find what I’m looking for... I’m looking to add an all in one sub/amp underseat to my 14 journey... I’m thinking of doing the LOC convertor with remote turn on integrated ... is this what is the best option? Can you access the speaker wires from under the driver dash? I do not have the upgraded sound system so no rca output from what I read.... will the LOC being installed affect the speakers at all?

Thanks! I was finally able to get outside (it’s been cold here) and take a look! It was just clipped in and came off easily! So I was able to install my new grill!

Thank you I will look at it more closely- if it doesn’t have the clips then is there no way of removing it without taking out the grill?

Alright so I’ve been searching around trying to find an answer to this question- the front badge/emblem on our journeys - from what I understand pre 2014 are easy remove but after it became part of the grill and is more difficult to “remove” is this accurate ? i have a 14 and bought a billet grill that I think is requiring removal of that badge thank you I know this has been talked about but I couldn’t find a solid answer on newer models

Mine didn’t switch to metric when I had it done

Hey everyone! I've been looking at some rims and I'm wondering if the tire size would work- is anyone running 265/50/20? I did a search but didn't find anything in the forumns thanks for the help

Thanks everyone! I got Stark brand... they were a pretty cheap one off of eBay. Like $30 only but I like them!

Thanks everyone! Got my LEDs today and all seems to be good for the lows!

Thanks guys...hmm

Has anyone done LED for the brights- I know they are also DRL so will that mess with the LED? Thanks!

Hey everyone! I have been looking around the forumn and making a few posts so I thought I'd introduce myself- I'm Brandon and I live in Wisconsin. I got a 2014 Dodge Journey SXT. I love doing mods so I will post as more come! Right now I tinted my front windows and just dipped part of the front bumper!

Thank you

I'm sorry if this was a topic discussed in the past but I couldn't find it in my search. My questions is- will LED bulbs work in our journeys without the need for relays , etc? Thanks!

My thought was that I would try to unplug the working one from the relay and then see if the non working one works... if it works than I'm guessing it must be a power consumption issue and the cap should help - if not maybe a connection issue. Does that seem logical haha?

Thanks for the response... I did try switching the comnectors and still no luck. I do not have a capacitor installed yet so would that be the reason? I do have one being shipped. I just thought that they both wouldn't work versus only one working thanks again

Hey everyone lots of questions on here! I have another! I looked through a lot of the posts and don't think I saw it. So I also am HID kit- I have one relay set up for both units. One side will light and the other side was intermittent and would squeal at times. Now it won't light at all but the one side continues to. I got a new ballast as that's what I thought the problem was but same thing with the same side. I emailed the support for the HID and they are saying I need a second relay, capacitors and resistors. Now from reading the posts I'm wondering if just adding one capacitor would do it and maybe there's not enough power to light both of the HIDs. I have installed many HIDs in the past but have never had only one side not work when they are connected to the same relay. Any thoughts ?? Do you think it just needs the capacitor? Thanks everyone!

Thanks again

Thanks for all the info! Is there a way (that if I wanted to) I could wire the led tube lights differently? Thanks again

Sorry one other question- so they are a different bulb then the stock correct? I just bought and installed HID on my car but now thought if I got these they wouldn't fit- is that correct?

Thanks for the information! So the LED lights what are they hooked up to if they are prewired? Do they come on as driving lights? thanks again

.

Sorry if this was stated somewhere already but are the "tube" lights connected within the wiring harness of the lights or do you have to run your own wiring? Also are the headlights easy to take out? I see a few bolts- is it just a couple? Thanks!!