Ok folks. Here's what I ended up doing with my 2011 Dodge Journey. I got researching all different dodge car brake peddle assemblies. I found that the 2010 crew model had the same mounting bracket as my 2011. What I ended up doing was get a stoplight switch from advance auto parts for a 2010 journey crew. Here's where it gets fun. The stem/plate on your peddle needs to be about 2" closer to the driver. I jb welded a piece of 1/2" tubing to it, as well as put a clamp around it so I didn't have to worry about it coming off.
Then I went under the hood and attached a 20amp circuit breaker. I attached one side to go to the battery. Other side goes to the first blade of the switch towards the plunger. The second wire blade from the plunger I hooked my feed wire to the controller wire. That way I have a dedicated 12volt from battery to breaker to switch to controller. Just took some engineering to figure out the switch issue.
