Jump to content





Sign in to follow this  
mavericks

Ordered New LED light buls for my Head lights

Recommended Posts

Are you adjusted, using line on the wall? Or went to garage and adjuted, using professional tool?Can you please add pictures, before and after adjustments?

I did the adjustment using the wall, sorry just saw your post, so cant post pictures before adjustment. Right now they look good.

Share this post


Link to post
Share on other sites

Did you replaced high beam as well? or just a low beam? what about fog lights, replaced then to?

Share this post


Link to post
Share on other sites

Lots of adjustment, or just a bit?

Took 10 minutes, Just adjusted the focus and everything looks good now..

Share this post


Link to post
Share on other sites

Did you replaced high beam as well? or just a low beam? what about fog lights, replaced then to?

Just the low beams. Planning to change my fog lights soon .not right now though. For high beams i have the OEM

Share this post


Link to post
Share on other sites

Not sure where you get the idea of having to aim m projectors down lol. They are at the exact same height as stock! If anything has to be adjusted its the projector its self, stock lights I parked 25 feet away from my garage marked my lights after the retrofit go back to the wall at 25 feet and put them in the same spot didn't lose any distance if anything I gained a massive amount and width its crazy, on a highway I light up five lanes wide, the step in my cut off is for on coming traffic #winning

Share this post


Link to post
Share on other sites

Panamera led drl in my headlights with mini h1 7.0 6500k xb hid bulbs, in my fogs I have xsb switchback turn signals

Fog lights are really cool. How much did you spend on them?? I might be interested.

Share this post


Link to post
Share on other sites

When it comes to my personal lighting I like my projectors with hid, my gallery speaks for itself on what i prefer for lighting performance wise, hid projectors will out perform one led bulb in a housing, now led projector on the other hand is damn close to hid projector in performance, those led bulbs you see online that say projector led are nonbetter than, a flashlight

Share this post


Link to post
Share on other sites

Panamera led drl in my headlights with mini h1 7.0 6500k xb hid bulbs, in my fogs I have xsb switchback turn signals

Sweet setup!

Am also running HID projector lights and will never go back. Am sure LEDs are cheaper, is it brighter? Does anyone have a comparison?

My fogs are JW speaker.

Share this post


Link to post
Share on other sites

At least all this modifications, do not void warranty:"NON-FCA MODIFICATIONS

The warranties in this booklet do not cover repairs required because of non-FCA modifications,
installation of special equipment or accessories, or use of special materials, fuels or additives. This
includes special bodies, body conversions, fuel system conversions, trailer hitches, window tints,
sunroofs, theft alarms, etc. Non-FCA modifications do not by themselves void your warranty, but they
are not covered by your warranty.""""

""""""

Share this post


Link to post
Share on other sites

Just replaced all headlights bulbs with LED ,on my 2016 crossroad, hi beam and DRL working without any issue, as fog lights as well. However, low beam is different story. The lights, is turned on, then right side light turned off, 10-15 min, later left side turned off. Added resistor to both sides, right side do not light up at all, after that, but left side still working fine. This is what I installed for low beam:Atshark 80W 7200LM 9006 LED Headlight / Headlamp Conversion Kit 3 COB LED 6000K Cool White Super Bright- Replaces Halogen & HID-2 Pack

Any idea, what it can cause this? Any one run on this problem?

Share this post


Link to post
Share on other sites

Even with resistor, left side low beam goes off after 15 min off ride.Just removed both resistors from both sides. Maybe some one can point to solution.

Share this post


Link to post
Share on other sites

Sounds like bad bulbs. I've been running LED's in low and high beam for about 6 months now no issues at all. Don't get high beamed by other drivers either.

Share this post


Link to post
Share on other sites

Same light bulb, working on high beam, without any issue (:

Share this post


Link to post
Share on other sites

Same light bulb, working on high beam, without any issue (:

The low and high beams are different bulbs.

Share this post


Link to post
Share on other sites

That is correct, I just swap them for testing. I think the issue with the "driver", I will try to swap the "drivers" from hi beam to the low beam and will see if it working that way.

Share this post


Link to post
Share on other sites
On 7/10/2016 at 9:11 AM, Cody Chornobey Powley said:

Morimoto h1 projector high and low beam 6500k @35 watt

image.jpeg

 

Dammit Cody! You're going to convince me to do this mod if you keep post pics like these. lol Yeah! I'd sure as hell hate to be the sucker that flashes you on that dark road....

Share this post


Link to post
Share on other sites
On 4/12/2016 at 7:15 PM, jkeaton said:

 

 

just curious its been over a year.....how are these holding out?  still recommend?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×