Moparman Posted May 15, 2012 Report Share Posted May 15, 2012 (edited) The LED fogs I posted about awhile ago showed up Here's who I bought them from http://www.ebay.com/...2ee83a7&vxp=mtr Look like decent quality, guess we'll see how they last. Very close match to 4300k HID headlights I put in. Quite a bit brighter to look at, haven't drove at night yet. You have to trim some little locating tabs on them, as they are not 100% match to OE bulbs, but thats the way it is if you want something bright instead of awful stock ones. Trim 2 spots to fit bulb in housing, and one to fit plug on. Compare to OE and you'll see what I mean. Just use a sharp razor blade. Plug also will not latch on, but does go on and seal correctly, so I just threaded a small stainless screw in , that sits against plug and bulb. I'll update after a night drive. Took pics with 1 new, and one OE so you could see difference. I have tried MANY LED fogs, and these are the only ones I have seen that are this bright, rest are a waste of time. Edited May 15, 2012 by Moparman Quote Link to comment Share on other sites More sharing options...
Moparman Posted May 15, 2012 Author Report Share Posted May 15, 2012 These are what they look like if ebay link quits working Quote Link to comment Share on other sites More sharing options...
Moparman Posted May 15, 2012 Author Report Share Posted May 15, 2012 Just tried them in the dark....noticeably brighter, very happy with them. Quote Link to comment Share on other sites More sharing options...
chryslerguy Posted May 15, 2012 Report Share Posted May 15, 2012 Looks awesome! A few questions: So all of the trimming and modifications needed are only done to the bulb, not the stock harness? How do you access the fog lights? Could you take a close up of the bulb in the housing with it off? I would like to see how it looks! Did you have to re-aim the headlights or do the HID's not blind people? Quote Link to comment Share on other sites More sharing options...
Moparman Posted May 15, 2012 Author Report Share Posted May 15, 2012 Looks awesome! A few questions: So all of the trimming and modifications needed are only done to the bulb, not the stock harness? Yes just bulbs, not the factory wiring or fog light housing. How do you access the fog lights? Jack it up a bit, and you can reach up in under the front corners. Could you take a close up of the bulb in the housing with it off? I would like to see how it looks! yep will do when i get a chance Did you have to re-aim the headlights or do the HID's not blind people? yes have to reaim after, I mark wall where stock are, then put HIDs in and aim to old marks. That gets you very close. Quote Link to comment Share on other sites More sharing options...
Destination Posted May 15, 2012 Report Share Posted May 15, 2012 That's in impressive difference in brightness. Quote Link to comment Share on other sites More sharing options...
onecrazyfoo4u Posted May 15, 2012 Report Share Posted May 15, 2012 Wow, 7W LED fog lights are pretty high up there. No wonder they're much brighter! Good to hear, I may have to get some of these! Quote Link to comment Share on other sites More sharing options...
humansoul Posted May 15, 2012 Report Share Posted May 15, 2012 Very nice...I'd love to see some nights shots of the front and also the view from the car if posible! Quick question about your HIDs, do they interfere with the automatic shut on/off when unlocking/locking the car or when you put it on auto for day/night sensor? Thanks! Quote Link to comment Share on other sites More sharing options...
Moparman Posted May 15, 2012 Author Report Share Posted May 15, 2012 Very nice...I'd love to see some nights shots of the front and also the view from the car if posible! Quick question about your HIDs, do they interfere with the automatic shut on/off when unlocking/locking the car or when you put it on auto for day/night sensor? Thanks! ok, i'll get more pics. No doesnt effect anything at all, work same as reg lights Quote Link to comment Share on other sites More sharing options...
humansoul Posted May 18, 2012 Report Share Posted May 18, 2012 ok, i'll get more pics. No doesnt effect anything at all, work same as reg lights thanks for the feedback. Did you buy the HIDs on ebay too or local? Easy to install or did you go to a shop? Nice ride btw, love the blacked out grill...I'm in Toronto, so hope to see you around if you're in the GTA Quote Link to comment Share on other sites More sharing options...
Moparman Posted May 19, 2012 Author Report Share Posted May 19, 2012 thanks for the feedback. Did you buy the HIDs on ebay too or local? Easy to install or did you go to a shop? Nice ride btw, love the blacked out grill...I'm in Toronto, so hope to see you around if you're in the GTA Got the HIDs from these guys http://www.ddmtuning.com/Product-Categories/HID-Kits-Lighting/HID-Kits Might try these guys next time, supposed to be one of the best out there http://www.theretrofitsource.com/product_info.php?products_id=3956 Installed myself, I'm a Tech at a dealer. Not really hard to do though, if your comfortable with a bit of wiring. I'm from Belleville actually :-) Quote Link to comment Share on other sites More sharing options...
pederw Posted June 30, 2012 Report Share Posted June 30, 2012 Do you need two HID kit? One 9005 and one H11? I´m going for this kit that you reccomended http://www.theretrofitsource.com/product_info.php?products_id=3956 (heavy duty relay) But now I wonder if I need a kit for H11 also? bit confused... Quote Link to comment Share on other sites More sharing options...
Moparman Posted July 5, 2012 Author Report Share Posted July 5, 2012 Just the low beams are HID (9006) the fogs are LED, from the link I posted above. Quote Link to comment Share on other sites More sharing options...
humansoul Posted July 5, 2012 Report Share Posted July 5, 2012 Looks like TRS modified and have an independent HID system for Mopar vehicles: http://www.theretrofitsource.com/product_info.php?products_id=18639 When I first inquired about the HIDs, they mentioned they needed a special harness to deal with the errors that people were getting when installing on a Mopar vehicle. This appears to now be included in this kit, but costs a bit more than the original HID kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.