Jump to content

2late4u

Journey Member
  • Posts

    4,432
  • Joined

  • Last visited

  • Days Won

    455

Status Replies posted by 2late4u

  1. hello can u help me with starting issues thanks

    1. 2late4u

      2late4u

      i have no experience on diesel motors but as it once would jump start then your problem might me wire related problems look for shorts clean battery post loose grounds at battery and starter,alternator problems and your key switch and try starting in the neutral position as well as in the park in case you have a bad park switch senor, good luck

  2. Does the spare tire have a pressure sensor?

  3. Hello,

    Can you please help me to find the correct answer for the following error:

    Can you please (if possible) find out from engineers, if it possible replace regular head light bulbs with LED light bulbs.
    Also can you, please (if possible again) to find from engineers, what this following errors mean, and how to be fixed:
    1) B162E-11 RIGHT LOW BEAM CONTROL-CIRCUIT SHORT TO GROUND
    2) B162E-15 RIGHT LOW BEAM CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN
    3) B162A-11 LEFT LOW BEAM CONTROL CIRCUIT SHORT TO GROUND

    here is my VIN:3C4PDCGG2GT191893

    Here is more information, just in case:
    ""No matter what I try, I get those errors with LED.I tried 4 different LED light bulbs. Just replaced all headlights bulbs with LED for testing, on my 2016 crossroad, hi beam and DRL working without any issue, as fog lights as well. However, low beam is different story. The lights, is turned on, so , when I switch gear to revers or drive position then right side low beam light turned off, when I put gear in the parking position and shout vehicle off light came back. I tried 4 different LED light bulb. However driverside light working without any issue.
    Also, regular light bulbs working fine, no errors and no shout down, after switching the gear
    """

    Thanks in advance,
    Alex

    1. 2late4u

      2late4u

      to be honest i dont think the led is the best option i kind of wish i had went with the hir bulb that has been discussed on this blog, i mean the led lights are okay but not that much better than i thought they would be. i used off amazon yita motor they do make the signs and road markings a lot brighter but i dont think i see that much farther down the rd.

    2. (See 3 other replies to this status update)

  4. Hello,

    Can you please help me to find the correct answer for the following error:

    Can you please (if possible) find out from engineers, if it possible replace regular head light bulbs with LED light bulbs.
    Also can you, please (if possible again) to find from engineers, what this following errors mean, and how to be fixed:
    1) B162E-11 RIGHT LOW BEAM CONTROL-CIRCUIT SHORT TO GROUND
    2) B162E-15 RIGHT LOW BEAM CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN
    3) B162A-11 LEFT LOW BEAM CONTROL CIRCUIT SHORT TO GROUND

    here is my VIN:3C4PDCGG2GT191893

    Here is more information, just in case:
    ""No matter what I try, I get those errors with LED.I tried 4 different LED light bulbs. Just replaced all headlights bulbs with LED for testing, on my 2016 crossroad, hi beam and DRL working without any issue, as fog lights as well. However, low beam is different story. The lights, is turned on, so , when I switch gear to revers or drive position then right side low beam light turned off, when I put gear in the parking position and shout vehicle off light came back. I tried 4 different LED light bulb. However driverside light working without any issue.
    Also, regular light bulbs working fine, no errors and no shout down, after switching the gear
    """

    Thanks in advance,
    Alex

    1. 2late4u

      2late4u

      had no problem installing led bulbs in my 14 crossroad, must be the bulbs you bought..

    2. (See 3 other replies to this status update)

×
×
  • Create New...