Hello, I have a 2014 journey r/t rallye.
I recently had to remove the rear differential and axels. After I put it back together drove it for a bit with no issues. Now when you first start the car up there is no lights on in the dash but the second you apply pressure to the brakes the ABS kicks in. Within a minute or so the traction control light to the left (on/off with the button shows up in the center) ABS and service AWD light comes on. I have a "Bosch 1350 prograde OBDII" scanner and I plug that in and it detects no codes. With the trouble shooting I have done before the lights come on the ABS is engaged all the time and the AWD works after the lights come on the ABS stops and have "normal brakes" (I think no ABS) but no AWD, FWD only. Also before the service AWD lights come on there is a swooshing sound comming from the front passages side that instantly goes away as soon as the service AWD light comes on. That was not there before diff removal. Also the rear camera now doesn't work post diff removal. It will now and then on its own accord but mostly is a black and white flickering. The sensors to the wheels are brand new less than 3 months old and the diff sensor is in perfect condition. Looking for any help/suggestions.