Jump to content

Swerv

Journey Member
  • Posts

    81
  • Joined

  • Last visited

About Swerv

  • Birthday 11/10/1985

Contact Methods

  • Website URL
    http://www.djforums.com

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello everyone, Sorry to be absent. Took the car to a few places and lo and behold, everyone seemed to have the same opinion. Even had the luxury of taking it to the "family mechanic" a ways off and got the same response. Final verdict - Thermo out, fan out, radiator cracked, overflow tank cracked, head warped, pistons fine and gaskets gone (obviously) and water pump. They did not find any water in the engine so he advised not to replace the entire engine as I "roll the dice" buying a used engine. With there being no water he said all of the bearings and what not will be fine. He said their diagnostics found a good amount of engine exhaust in the head which tells them the gasket is blown. He did say I could continue to operate but it is a potential hazard if it decides to heat up again. At this point I am making the repairs and reaching out to Chrysler to see why no light was thrown and why my temp gauge never climbed higher than normal. Will keep you guys updated as best as possible!
  2. Hey guys, Last week I noticed coolant leaking from the front of my car. Figured a faulty or worn radiator had finally decided to give out. Seems that the thermostat malfunctioned which caused the radiator to pop, cracked the overflow tank, warped the head and pistons and blew the head gasket. The mechanic is a friend of a friend and said to replace the thermostat, coolant overflow tank, radiator, new head gasket, machine the pistons, new main belt and water tank was going to be between $3,400 to $4K. I NEVER got any warning indicator light to say the thermostat malfunctioned or anything. The temp guage never went past half way ever.... Does this seem right to you? Should I have gotten a warning indicator light for faulty thermostat? Does this price seem fair? Should Dodge pitch in if no warning light was present? Its a 2009 Dodge Journey SXT V6 with 60,000 miles. Always took care of her and ran synthetic. Did suspension on her and everything. Please help
  3. Thanks for the input guys! Larryl, can you explain to me what sort of tools i would need to do the change and check the fluid level? I will let you know how the Amsoil works out
  4. My old man is an Amsoil dealer and I just picked up engine oil and transmission oil. I usually have a guy do my engine oil... It's a shell gas station with a service hub and although some people have their opinions on these places... The dude has always taken care of me and i have never had a problem. What is bothering me is i went to purchase a replacement transmission fluid filter and it seems a bit more complex than just changing the oil and oil filter. This mechanic has been doing this stuff for a while so i dont think he couldnt do it but i was just wondering if i should take it to the dealer or an exclusive transmission place? Again i already have the fluid and filters but when my mom did her amsoil swap they charged her 200 just to change the fluid and filters :/
  5. So i have been day dreaming over flat black wheels with a white lip... I cant find any and a friend looked at my wheels and said "Ya know you could just paint the wheels you already have and it would look sporty" Thats not a bad idea!!! I have done some research and found a lot of information. There are many good places on forums for tips, like this one: http://www.focusfanatics.com/forum/showthread.php?t=167906 So i am thinking of getting some dupli-color paint and trying this on my own. The only real problem with doing this is chipping. They say the better you prep and take your time the more life the paint will have. If anyone has had any experience doing this please let me know. I am also considering powder coating but that can cost lots of money. Here are some crude mock ups i did:
  6. http://cgi.ebay.com/ebaymotors/Dodge-Journey-2009-3-5L-Drill-Rotors-Ceramic-Pads-F-R-_W0QQcmdZViewItemQQhashZitem4cf4930f0eQQitemZ330520792846QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Magnum Rotors & Pads They have them for different model years too
  7. Alright brakes and rotors are done! I feel a great deal of improvement in braking performance. No noise what so ever and my brake pedal feels so much smoother. I will keep you guys informed of wear and if i have any other issues but so far so good. When i looked at the old rotors and pads the mechanic said it appeared to be "Cheap Material" and said its the same stuff he pulls off all cars (stock parts) and showed me the wear pattern on the rotors. So there you have it! After market rotors and pads by Magnum... All four for only $250 shipped to your door.
  8. I have my guy throwing on the new rotors and pads as we speak. Will post up some pics when the car is ready and give you a progress report!
  9. *UPDATE* Here are the rotors and pads out of the box... The weird thing was that the pads were wrapped in plastic and in a small box. The manufacturers box's for the pads were folded and shipped with the rotors. I figured they maybe just had a small box and big box so they got lazy... I dont think they shipped me bunk pads and they sort of look like the ones on the website. Anyhow i emailed them about it so i will see. PADS: ROTORS:
  10. Will do! Now does anyone know what the torque settings are for these wheels?
  11. Couldnt take it anymore... Now one of the clamps has fallen so the breaks are squeaking so bad. I had done some research and spoke with the family mechanic and asked about Ebay grade parts. After much research i found out that these Magnum rotors are actually pretty good and that currently no one has had any issues after years of use. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330513477981&ssPageName=STRK:MEWNX:IT I bought them today and they will arrive next week. Will post pics of installation and keep you updated on performance and how they hold up. Price was $250.00 for 4 rotors and 4 ceramic pads... cant beat that.
  12. Very cool project! I have the 3rd seating row so i couldnt do this... but i do have the small storage bin that flips up so i might be able to install something in that.
  13. The tips are there, i am in the process of having a custom exhaust system built so ill take some pics of that when its done.
  14. Question... mine has a picture of a mini dodge journey and it says "x2" inside of it... what is that?
×
×
  • Create New...