I ordered a replacement rear caliper bracket and it showed up and thought everything was going smoothly.... then my nightmare began!!
I've spent about 10 hours over the past week trying to figure this out.
I have a 2012 Journey manufactured in April of 2012 with brake code BRE. Supposedly the Caliper Bracket (also sometimes called an adapter) I need is Mopar #68192437AA, which is Cardone #14-1269. I have 328mm rear discs which confirm I have the brake package for cars manufactured after March 23rd of 2012. Before this date Cardone claims you need #14-1257 which Amazon lists the same dimensions for, even though earlier models used 305mm discs. Possible, but unlikely the caliper bracket would be identical dimensions, right?
Amazon and eBay both list the size of Cardone 14-1269 as length 7.2 inches, but I contacted Cardone and they told me the length of both is 6.793". Which is the size they sent me, and my brake pads and caliper pins won't fit because the size is too small. My brake pads are 5.125 inches long so I definitely need a bracket over 7 inches long.
My theory is Cardone is run by a bunch of idiots and that 14-1257 should be smaller (6.793 inches) and 14-1269 should be bigger (7.2+ inches) and that Cardone is selling them as the same part in different boxes.
I have tried to hammer out the pin stuck in my bracket, but I don't own a vise and my torch is out of gas, and just want to buy a replacement. Can anyone help me!!
Will Mopar #68192437AA actually fit my car? Can anyone tell me the width of tab openings for the pads for this part? Cardone claims they sell this part re-manufactured, so I'm tired of buying the wrong parts and sending them back. My brakes are dragging as I drive, and create an ungodly sound, not only is this embarrassing but my gas mileage is horrible!! Money is very tight right now, so buying an entire caliper is not an option.