stevalram

Forgot to update. The problem was the wire harness from the PCM to engine. Removed the wire harness that came with the engine and swapped in the the original harness the from the removed engine. There was some short within the harness and possibly was damaged when the engine was removed or damaged in the roll over accident.

It came out of a roll over 2013 Dodge Journey with 89,000 miles on it from a wrecking yard. The original engine lost oil presure and over heated the top end and mix the oil and water, it had 48,000 miles and I was the one that replaced the engine. Warranty was 30 days. The engines look identical but maybe there are difference.

Hoping I can get some help with fixing these error codes P0340 & P0365. I replaced the engine on a 2012 Journey 3.6 with a used engine that came complete with wire harness. After starting it the engine the light came on and the engine shut off. Restarted it and it stayed on on the third restart, and the rpms don't go above 4000. The codes call for a camshaft position sensor A and camshaft position sensor B bank 1 circuit malfunction. I checked all the connection and everything seem okay. Are these two different sensors causing this problem and where are they located? Thank you for the help.