Jump to content

EGH1975

Journey Member
  • Posts

    3
  • Joined

  • Last visited

  1. HI Everyone, This is my first post. Today I have a problem with my '09 Journey and was wondering if anyone else has had it and how to correct it. Just like the title says the power window on the passenger side stopped working. The switches on both driver and pass. will not bring it down. All others work. I checked manual to find fuse but it only lists driver window. Please help thanks.
  2. Thanks for all your replies it gives me hope that all will be well. Just a couple things to add. Yesterday I received my recall slip something to do with the power and fuse. And a nice day out I decided to clean the vehicle. Does anyone have any tricks on how to clean these seats? They are not leather. They are the ones that are cloth the ones that come with SE I guess. While cleaning I noticed the rubber piece the put on between the backdoor and the frame was loose and starting to come off. That piece sits on the lower left on the arch if you are facing the car. Anyone else?
  3. Where do I start? I had a problem with the Journey decelerating. So I had my computer flashed. And then again. So I've had my computer flashed twice. Right now I need to bring it in because when I have my heater/ac off and the temp controls set to the coldest on both driver and passenger I get a lot of heat under the dash on the driver side. I have to turn on my A/C for a minute then it goes away. I've also had a delay in the car starting a couple of times. Lately the radio is turning the channel by itself. At first i thought my wife was doing something wrong but then I checked it myself and the radio does turn on it's own. And how the heck do you clean them seats. Even if water gets on them they stain. I had snow drop in from the window and now there's a water stain. Big mistake getting the 4 cylinder because I feel that's it's sluggish at times. It doesn't accelerate real good and sometimes it's ok. One last thing if anyone knows if this is normal, when you push your turning signal on, but not allow it to click in, like you're changing lanes and then let go, does the blinker stay on for a few seconds after you let go? Nice to know if there is anyone else with these issues? thanks
×
×
  • Create New...