Jump to content

Ramrod

Journey Member
  • Posts

    7
  • Joined

  • Last visited

Everything posted by Ramrod

  1. Yep mine did as well. 35k on it.
  2. I have access to machine my own TB's and I have mine Ported out to 73mm on my Dodge Charger. MPG dropped a little, but not much. Throttle response was improved and it pulled a little harder in all the gears. I went through 3-4 cuts and Flow tested them before we found the best cut. Hypertech makes a Tuner for the 3.5L, but it's only a 9hp Gain. If combined with CAI, Ported TB and Exhaust. Would be the best set up.
  3. Depending on the Flowmaster you have. A 44 or 40 series will Drone around 2200 RPM. A 50 Series should be alright. If you keep your Stock Reso's on the back your won't here much of a difference in sound. They do a good job of keeping things quiet. What you can do is run a 44 series Flowmaster for the main Muffler. (suitcase) Then replace the Reso's in the back with Turbo Mufflers to knock out the Drone. Also if you want to save a few bucks. The Cherry Bomb Pro Muffler is built a lot like the Flowmaster and $20 cheaper on some sites. I heard one on a 3.5 Charger and it's one of the best sound v6 Chargers I have heard. It was just freakin loud. The Turbo mufflers with knock that loudness down and the drone out. But still give it a nice deep tone. Also I wouldn't go any bigger then 2.5in Dia Pipes.
  4. Pictures of what you guys have done would be nice. I have a CAI from E-Bay for a 2.7L Charger. I have been thinking of cutting it down and mounting it to my Journey. I have also been thinking of talk with 3g and getting a RAW 3.5L set up and weld on my own Bracket for the Journey. Maybe if I do this, 3g can get the Ball rolling on a Big Bully for us. I run a Big Bully on my Charger and love it.
  5. Will the new 2011 Grille fit a 2009 R/T? I've been wanting to change the Grille out.
  6. I have the headrest installed and the backs are easy enough to snap off. Once you get the wires feed through the seat. Were have you guys been hiding the wires? Specially the passenger side. The way the passenger side folds down. I couldn't figure a way to run the wires with out having the hanging out.
×
×
  • Create New...