deseboy

I Spoke to the the dealer last week, They contacted Dodge UK who advised us that the connector in the glove box is only utilized when the uconnect module is fitted - They quoted £600 to do this.................... - I thought this was quite an expensive way to skip tracks on my ipod, therefore shall keep using the AUX port instead. The Uconnect modules are however available on the ebay for about £165 from the US if you wanted to import one to the UK and fit it yourself - Its apparently quite a simple job.

Hiya, the connector supplied is a genuine mopar part - It has a 16 pin dodge specific connector on one and and the apple ipod connector on the other. Please see photo.

Hiya, We have a UK 2010 Dodge SXT with the factory standard RET radio. There is a IPOD specific connector in the glove box - We have purchased a MOPAR DODGE IPOD IPHONE INTERFACE ADAPTER CABLE OEM (110663042486) to allow us to play and control music using the steering wheel controls. When we plug it into the ipod - the ipod says "not supported accessory" We have tried it with a Iphone4 ipod classic 120gb and an iphone 3gs - all with the latest firmware from apple. The manual says to press the AUX button two times to enter the UCI mode, i tried for two hours last nigh - surely i must be doing something wrong?????? PLEASE HELP!!! We can however use a 3.5mm jack cable, but as you will all understand, this does not skip and control the tracks.