MarkCee

Thanks all for the replies and sorry for the late update. Upon closer inspection I did find a bend/kink in the plastic at the turn leading to the nozzles. When the hood was closed, the kink closed up completely, causing the issue. I cut out the bad piece and spliced in new line.

I recently picked up low-mileage (28K) 2018 and discovered that the front windshield washer was not doing much but dribbling out when activated. I opened the hood to check connections and all are good. While I had the hood open I also cleaned out the emitter orifices with a needle. I left the hood propped open, got back in the vehicle and ran the washer and it sprayed like a champ. Closed the hood and tried again and back to just a dribble. To clarify, with the hood closed the emitter on the driver's side 'dribbles', the passenger side emits nothing. The lines appear to be running along their proper route, so don't think anything is getting kinked when I close the hood. Any suggestions?