michbl1

Some years ago I've updated UC 8.4 via USB with software downloaded from their site, but it was done with old 8.4 without NAV. That time i didn't sam any differences.

After diagnose via computer, mechanic saw that there was temporary problem between communication with radio hub (the one which I've replaced one year ago). Do I need to update new radio box (Uconnect) in vehicle computer ? After replacement I've only changed HVAC settings for all sections of AC

It is continues doors are lock dashboard on/off/of/off... after entry to the vehicle the same, after engine start and stop and ignition on OFF position even radio is on... No I've disconnected negative cable from ACU to not to "kill" ACU.

One year ago I've changed main radio box from 8.4 Uconnect without navi to 8.4 Uconnect with navi. Till today everything was working properly.

Hello, Today I noticed that after locking the car, the dashboard clocks turn on and off on their own, then turn on again for a few seconds and then turn off again... what could be the reason ? remote key is far from the vehicle and the situation is continues Thanks in advance. Freemont 3.6

Yes, thanks... F.Y.I. but my question is related to settings changes in vehicle computer

How to change and where change in AlfaOBD time delay of switching in AUTO mode from no working lamps in to Road Lamps. While entering in to a tunnel it is 5 seconds delay when lights are getting on, and 5 seconds are really long time regarding that. Thanks in advance

Is there any option how to switch off (kill) that four beeps which are always heard during starting engine ? (manual, via Multiecuscan, AlfaOBD)

Previously everything was working fine, front, rear climate was set via uConnect display, but once when pressing display "climate" and checking rear side I've noticed that there isn't anymore possibility of set it via display (only "lock" on a display regarding Rear climate). Working only manual set, under the roof.

Hello, I have a problem with rear climate control on uConnnect 8.4 display. Since some days it isn't present when choosing REAR CLIMATE, previously it was full of settings for rear climate (temp, direction, fan speed) but now only present is empty display and "Lock" icon. Front climate is ok, I can only manually change all by usage under roof buttons. Thanks in advance