Brandon E Harrington

sorry I haven't got back with pictures but I can't get them to upload. the issue I think is because my dj always sends out ( not sure of the wording ) that power to check if the bulb is out or not which causes the hid to screw up. I hope you understand from my lack of mechanical wording.

anyone know of anything to get more power out of the 4 cyl 2.4. I absoulutly hate getting in a crunch on the interstate or around town with no get up and go.

I had them made and they work for other dj's the problem is with the HID's I have tried a relay but that's not working.

so I did another driving test. This time they worked fine for about 10 mins then I came up to a red light and both headlights flickered a little as I came to a complete stop. When I got home I put the car into park and hit the gas pedal a little and they flickered again and one of them went out. I turned of the headlights and turned them back on then tried giving it a little gas and they flickered again then the other side went out.

No no no. Do not put led bulbs.in or those yellow bulbs. Go to the retrofit source and buy what I bought. Led projector fogs. U wanna be amazed!? Little expensive but its worth if my friend.

do you have a link to what you bought?

so i installed hid's into my new projectors that i made. I also used a wire harness and hooked it up to the battery and also to the grounds. They ran just fine for the first hour or driving but when the Air conditioning turns on they start to flicker a little bit or when I have to stop abruptly and the engine shifts back down to first gear. I'm not sure what I am doing wrong. But I think it has to do with how much power is going to the headlights. Can anyone please help I am planning on going on a long trip tomorrow I need to fix this ASAP.

I saw some Nokya Hyper Yellow PSX24W Fog Light led 's that aren't that expensive

Does anyone suggest LED bulbs? Any recommendations please on this ?

Hey everyone,

Quick question. Has anyone put HID's in their fog light housing? I was going to do it but it's all plastic. I am afraid the light will melt the housing the bulb goes into. Can anyone share their experience?

Were they worth it Cody? I like that guys work. I'm just not mechanically inclined enough to do these.

I found a guy out of Cali that will do anything you want with your headlights. Sick HID's

Yeah I saw the ones on eBay I think they aren't worth it at all. But just thought I would ask just in case someone else saw something elsewhere.

I am looking to buy a set of custom projector headlights I can use with HID lights in my 2015 DJ that does not have DRL's. I am not mechanically inclined so I'm looking for someone or a business that will custom make projector headlights with halos and the led light strip at the bottom. Thank you in advance.