BlackTopJourney13 Posted July 5, 2013 Report Share Posted July 5, 2013 Can the Journey (v6) use the avenger intakes? Can't seem to find anything other than drop in K&N filter... Quote Link to comment Share on other sites More sharing options...
superkeggler Posted September 2, 2013 Report Share Posted September 2, 2013 I read somewhere in another forum that the 3.5L Avenger CAI worked with a small amount of tweaking. It appears to look just like the standard OEM Air box mounts. I'll see if I can find the thread and post it here. NO LUCK, but I did find this...... Here's one post:::DIY High-Flow Air Intake You can do your own high-flow intake like I did. I have the 3.6L so I do not know how this would work for the 2.4. Step 1: Get some three inch exhaust coupling pipe from your local car parts store. they are usually three or four inches long. While you are there, get one of the generic cone style air filters from K&N or whatever is on the shelf. Ensure that it fits the three inch piping and is not real long and that it comes with a clamp. Step 2: Go toy your Journey and take out the entire air filter box and snorkel. Three screws if I remember correctly and lifts right up and out. Also remove the box top from the rubber intake piping. Step 3: Insert half of the coupling pipe into the rubber air intake piping and clamp down using the original clamp. Place the cone filter on the other end and clamp down using the clamps that are typically provided. Your journey now has more air to breathe, a little cooler intake, and you should now feel some additional get-up-and-go. Plus it now has a bit of a growl to it. OR the easy way is to just take that filter box out and remove the snorkel in the front. It is very restrictive. After removing the snorkel, you can also enlarge the hole or add more holes around the lower part of the box with a large drill bit or 1" drill hole saw. Either use your current regular air filter or replace it with a high flow style K&N or other. This will still add some pep and growl to your journey. DISCLAIMER!!! I am not responsible if you do something wrong or break something in the process. I did this myself and I enjoyed the results. Enjoy!! Quote Link to comment Share on other sites More sharing options...
Bubba Posted September 2, 2013 Report Share Posted September 2, 2013 If you look at page 4 of accessories , modifications you will see a couple of different posts for cold air intake [ CAI ]. he said he used avenger CAI from K&N and worked with a bit of tweaking . Quote Link to comment Share on other sites More sharing options...
srk23 Posted September 12, 2013 Report Share Posted September 12, 2013 yes the avenger intake from K&N will work all you have to do modifying wise is cover a hole where the air snorkel goes, its made for the avenger so on the journey its in a odd spot other than that its a direct fit! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.