OK so here is a quick write up on how to get the DVD video signal off of your stock 6 disk radio unit. (this will not work with the RES model)
The picture I made shows which pin on the radio supplies the video out signal. The trick was how to attatch a cable to that pin. Well being the computer teacher/nerd that I am I had some jumpers lying around(lower left picture). I then clipped off the end of an RCA cable (12ft cabels)and stripped back just enough to put the center wire of the RCA through one side of the computer jumper and crimped it(smashed that one side of the jumper) using a pair of needle nose pliers. If you use this same method make sure that you cut away the negative wiring on the RCA so that it doesn't cause a short. Then use electrical tape to tape the jumper and RCA wire to ensure it dosent come loose. Then use the needle nose pliers to slide the uncrimped half of the computer jumper onto the indicated pin and you have video.
Thank you for your information, is the data that I'm locking for. I'm buy 3 weeks ago my Journey and have this kind of radio, I'm ask to the Dodge dealer and is very expensive the roof srcreen and I have the idea to put a screen conect to my radio.
I will try this afternoon.
Do you have more information about thr rear c1, c2. c3 pin out?
Dodge will tell you you can't use the in dash DVD player
in Accessories, Modifications
Posted
Thank you for your information, is the data that I'm locking for. I'm buy 3 weeks ago my Journey and have this kind of radio, I'm ask to the Dodge dealer and is very expensive the roof srcreen and I have the idea to put a screen conect to my radio.
I will try this afternoon.
Do you have more information about thr rear c1, c2. c3 pin out?
Thank's again for the info