Jump to content

ODIMUS

Journey Member
  • Posts

    18
  • Joined

  • Last visited

Posts posted by ODIMUS

  1. My 2010 Journey is having a problem on rainy days where the rear right door fills up inside with water and I have to peel a sticker on the bottom to drain.

    I cant figure it out on how the water is getting inside.Anyone experienced anything like this and what was your solution?

    noticed the same thing yesterday...closed the back driver's side door and it sloshed...not sure if the cold weather has anything to do with it...

  2. Well that makes life a bit easier. You'll need THIS connector for your choice of head unit. The ones I've seen the most buzz about are the Pioneer and the Alpine. NOW, I don't think navigation is a plug and play kinda thing. Navigarion units need a VSS (vehicle speed sensor) input from the car. There is a lot of debate and down home enginuity going on to solve that issue because of the CAN bus in these and similar DCJ vehicles, but the PAC-audio radion replacement harness is supposed to solve that issue.

    Is this a great alternative to MyGig??? That is up to you. If you plan to add aftermarket amps, speakers and subs then yes in the long term. If not, I would search for a MyGig model RER and factory navigation antenna and Bob's your uncle there you go. But it's ultimately up to you. I hope this was helpful and you can make the right choice for you.

    Omar

    Thanks!!!

  3. Welcome ODIMUS

    There are some things you should know about MyGig radios. Most will work in your SE AS LONG as they are the same bus speed! Some Chrysler/Dodge vehicles have a low data bus and some (journey's) have high data bus speed. SO, the MyGig you buy will have to be high speed data bus. After that it's pretty much plug and play, UNLESS you purchase a model with navigation. In that case you will need the factory navigation antenna. Here check out this link, this site has a lot of good info about MyGig systems. Hope this helps

    Omar

    Thanks Omar! I'll check it out :D

×
×
  • Create New...