Charger

12 minutes ago, nehvada said:

yes! allways. i thought its only for avoid hyper flshing but also the switchback works only with resistors installed. (and i have no idea why)

Could you take a picture of the wires with the load resistors? I'm just very hesitant messing with the wires. 

1 hour ago, nehvada said:

my kit arrived today and i installed it. works flawless but i am not too happy with the turn signal brightness.

looks like a accidantially ordered a cheaper/older version of these bulbs. so i ordered the ones with alloy housing today.

i'll keep you updated if outcome is better.

 

ordered these today:

 

http://www.ebay.de/itm/371752767637?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

those are probably outdated:

 

http://www.ebay.de/itm/232068692138?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I assume they require load resistors?

46 minutes ago, OlDirty said:

 

I'd suggest turning a screw or two & seeing exactly what the dealership was talking about. I really couldn't see my local stealership even trying "such nonsense" as to install an aftermarket part. It'ii probably plug right in. Good luck Charger. 

 

I ended up returning the lights and got LED bulbs instead. Cheaper and looks great. 

8 hours ago, Roberto Biraghi said:

I bought this kit:

https://it.aliexpress.com/item/2X-T25-3157-2835-42-SMD-Dual-Switchback-Load-Resistor-Turn-Signal-Light-LED-Bulb/32706708354.html?spm=2114.13010608.0.0.ifTq1u

I'm waiting to get it. As soon as I'll install it, I'll let you know and I´ll post a video of the risult.

Thank you!

Did you figure out anything?

Looks like they are the similar but just need two small tabs removed. I don't know much about the load resister. Looks like it is needed otherwise your blinker indicator in the interior will blink quickly thinking your bulb is about to burn out. 

Looks like these might work. I've been thinking of doing this as well. 

https://www.amazon.com/gp/aw/d/B0110NHJV8/ref=mp_s_a_1_7?ie=UTF8&qid=1484103969&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=led+switchback+amber+white+light+3757A&dpPl=1&dpID=41Vc5cyJ-YL&ref=plSrch

Thanks for the help! Here's what I ended up giving a try.

https://www.amazon.com/gp/product/B01CB5JZY8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

13 minutes ago, 2late4u said:

www.carid.com/lumen/fog-light-led-bulbs.html   for all your led bulb needs or go to ebay. plug and play on the journeys i have led in my low beam didnt bother with the others. check the forums on led  alot of info.one thing i think if i was to do it again i would go with the hir bulbs that has been discussed here in the forums...

Thanks for the help. I'll have to look into them!

10 minutes ago, 2late4u said:

just replace the bulbs......with led bulbs  no conversion necessary..

Really? You don't need a conversion kit for led? What about led low and high beam bulbs?

I saw a bunch of led lights but then I would need a conversion kit. Anything non led?

I recently bought Sylvania Silverstar ZXE bulbs for my 2015 Journey Crossroad for both high and low beam. They look great but now the fog lights need to be replaced. I went to an auto parts store and tried to special order the same lights for the fog lights but they didn't have them. I can't seem to find any fogs other than regular replacement bulbs. Anyone know of other ones that would have the same whiteness or a blue tint that works for the fog lights?

Thanks!

I meant to post in this thread.  Not sure what I did. 

I bought the same light assemblies and brought them to the dealership to install. They couldn't install them because the connections didn't match. They told me I needed a wire harness to fit. But when I bought them it said it would fit a 2015 Journey Crossroad and was a plug and play and required no other wires. Any idea what is going on? 

I bought the same light assemblies and brought them to the dealership to install. They couldn't install them because the connections didn't match. They told me I needed a wire harness to fit. But when I bought them it said it would fit a 2015 Journey Crossroad and was a plug and play and required no other wires. Any idea what is going on?