SeanTacular

Or you could just change the 2 existing reverse light bulbs to the led projector style bulbs. I originally got the idea from animal mother. He put two 60 watts bulbs and that's how I knew I could run four 30 watt bulbs without melting any wires. That would be the cheapest easiest way.

To free up the turn signals you need to get the "tail as turn" module from diode dynamics.com. It's like $15 I think. Then buy 30w led reverse light bulbs off amazon or eBay (I got mine off eBay) then get vampire clips/wire splicers and run wires from existing reverse light wires to the turn signal housing and splice them in. Insert bulbs in sockets and your done. I ran the extra wires from the reverse lights around the tail gate and down to the outside tail lights.

Yuup. Reversing at night is way easier now. The turn signal housing is also reflected out to the side on an angle so the reverse lights light up a wide area now. Really worked on a tailgater the other night. I was stuck in slow traffic and catching every red light. This guy was right up my ass and even at red lights would stop when his bumper was an inch away from mine. So next red light I popped it into reverse and Bamm! He had to put his hands up to cover his eyes hahaha he stayed back 2 -3 car lengths until traffic started moving quickly again. Lol

Is that hydro dip or paint? Looks awesome!

Lol wait till my next pic. I just picked up a tilting boss motorcycle carrier for the back of the journey. Getting a hitch installed this week and all the stickers will look more fitting when my bike is on the back being hauled to the forest trails and mx track lol

Gunmetal and green racing pedal set. One for gas and one for brake.

Did you take the center PC out or dip it with it on and just masked everything else off? Looks great and I've been thinking to do it. Tried taking the grill apart but started busting clips and stopped lol

Haven't had time to install them yet to know personally but people who have added them say they are crazy loud. I'll update when I do get them installed and let you know and post some pics.

Doesn't glow. That would be cool lol but in the day the trim does capture light and sort of reflect it out making the green "pop"

It's called gap filler molding or gap trim molding. Has a thin tail edge the slides deep into the gap and the round top stay exposed that way you don't have to glue it down or use 2 sided tape which can ruin the surface if you want to change the colour or remove it. Got it off eBay for $1 a foot.

Thanks. It's called gap filler molding. Has a thin tail edge the slides deep into the gap and the round top stay exposed that way you don't have to glue it down or use 2 sided tape which can ruin the surface if you want to change the colour or remove it. Got it off eBay for $1 a foot.